Harmony, Modular speed control relay, 5 A, 1 CO , 24…240 V AC/DC

RM35S0MW

Be the first one to review this.

To View the best prices please Sign in / Register.

Only 0 left in stock.

Harmony, Modular speed control relay, 5 A, 1 CO , 24…240 V AC/DC

Description

How to Video

Promotional Video

Product Details

Activity	IDSIG
Pincode Group	default
Part Number	RM35S0MW
Rated current	5:00 AM
[Uc] control circuit voltage	24...240 V
[Ui] rated insulation voltage	250 V conforming to IEC 60664-1
[Us] rated supply voltage	24...240 V AC/DC
ambient air temperature for storage	-40-70 °C
compatibility code	RM3
connections - terminals	screw connectors
contacts material	cadmium free
control circuit voltage limits	- 15 % + 10 % Un
IP degree of protection	IP20 (terminals) conforming to IEC 60529, IP30 (casing) conforming to IEC 60529
marking	CE : EMC 89/336/EEC, CE : 73/23/EEC
maximum switching voltage	250 V AC/DC
mechanical durability	30000000 cycles
minimum switching current	10 mA at 5 V DC
mounting support	35 mm symmetrical DIN rail conforming to EN/IEC 60715
operating position	any position without derating
operating rate	<= 360 operations/hour full load
overvoltage category	III conforming to IEC 60664-1
pollution degree	3 conforming to IEC 60664-1
product certifications	C-Tick, GOST, UL, GL, CSA
product or component type	speed control relay
range of product	Harmony Control Relays
relative humidity	95-95 % at 55-55 °C conforming to IEC 60068-2-30
shock resistance	15 gn for 11 ms conforming to IEC 60255-21-1
supply voltage limits	20.4-264 V AC/DC
tightening torque	0.6-1 N.m conforming to IEC 60947-1
utilisation category	AC-12 conforming to IEC 60947-5-1, AC-13 conforming to IEC 60947-5-1, AC-14 conforming to IEC 60947-5-1, AC-15 conforming to IEC 60947-5-1, DC-12 conforming to IEC 60947-5-1, DC-13 conforming to IEC 60947-5-1, DC-14 conforming to IEC 60947-5-1
width	35 mm
contacts type and composition	1 C/O
Supply frequency	50/60 Hz +/- 10 %
Maximum power consumption in W	3 W DC
Reset time	50 ms contact S2 in memory mode on time delay, 1 s supply Un in memory mode on time delay
Immunity to microbreaks	50 ms
Input compatibility	3-wire sensor (E1) PNP or NPN, 12 V, 50 mA, NAMUR sensor (E2), 12 V, 1.5 kOhm, voltage input (E1), 0...30 V, 9.5 kOhm, high state >= 4.5 V low state <= 1 V, volt-free contact input (E1), 12 V, 9.5 kOhm
Measurement error	+/- 0.1 %/°C with temperature variation, < +/- 1 % over the whole range with voltage variation
Switching capacity in VA	1250 VA
Time delay range	0.6...60 s adjustable on energisation delay (tolerance: 0...10 % of the full scale value)
Nominal output current	5:00 AM
Housing material	self-extinguishing plastic
Repeat accuracy	+/- 0.5 % for input and measurement circuit, +/- 0.5 % for time delay
Hysteresis	5-5 % of threshold
Output contacts	1 C/O
Dielectric test voltage	2 kV AC 50 Hz
Relay monitored parameters	overspeed, underspeed
Maximum power consumption in VA	5 VA AC
Measurement range	0.05...0.5 s, 0.5...5 min, 1...10 min, 1...10 s, 0.5...5 s, 0.1...1 s, 0.1...1 min
Threshold setting	10...100 %
Relay name	RM35S
Relay type	speed control relays
Run-up delay at power-up	0.05 s
Polarity	reversible polarity on DC supply
Non-dissipating shock wave	4 kV
Input frequency	0.0017-20 Hz
Maximum supply current for sensors	40 mA for < 24 V AC at 25 °C, 40 mA for < 24 V DC at 25 °C, 50 mA for 24...240 V AC, 50 mA for 24...240 V DC
vibration resistance	0.35 mm (f= 5-57.6 Hz) conforming to IEC 60068-2-6/IEC 60255-21-1, 1 gn (f= 57.6-150 Hz) conforming to IEC 60068-2-6/IEC 60255-21-1
status LED	1 LED green for power ON, 1 LED yellow for inhibit, 1 LED yellow for relay (R)
electromagnetic compatibility	emission standard for industrial environments conforming to EN/IEC 61000-6-4, emission standard for residential, commercial and light-industrial environments conforming to EN/IEC 61000-6-3, immunity for industrial environments conforming to NF EN/IEC 61000-6-2
ambient air temperature for operation	-20-50 °C
standards	NF EN 60255-6, IEC 60255-6
insulation resistance	> 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5, > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60664-1, > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60255-5, > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60664-1, > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5, > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1
Measurement Accuracy	+/- 10 % of the full scale value
Impulse Duration	>= 5 ms high state, >= 5 ms low state
Electrical Durability	100000 cycles