inductive sensor XS6 M12 - L62mm - brass - Sn4mm - 12..48VDC - M12
XS612B1PBM12
Description
This XS cylindrical (M12 thread) inductive proximity sensor has a PPS sensing face and a nickel plated brass case. It has a supply voltage of 12V to 48V DC. This general purpose threaded cylindrical inductive proximity sensor is flush mountable and has an increased sensing range. It is mountable directly on a surface or bracket, thanks to its outer thread and twin nuts. Corrosion-resistant and non-magnetic nickel plated brass provides magnetic shielding to the sensor, better accuracy and immunity to magnetic disturbance. It has 4 LED viewports for easy sensor status viewing, setup and troubleshooting. IP65, IP67 and IP69K protection makes this product ready for the harshest environments. It can operate in very cold (-25°C) and hot environments (+70°C). It has a standard M12 connector, compatible with all existing market sensor cabling. It is CSA, UL certified.
Product Details
| Net weight | 0.02 kg |
|---|---|
| Enclosure Material | nickel plated brass |
| Material | metal |
| Length | 62 |
| Maximum Delay Response | 0.2 ms |
| Supply Voltage Limits | 10-58 V DC |
| Series Name | general purpose |
| Sensor Type | inductive proximity sensor |
| Detection Face | frontal |
| Thread Type | M12 x 1 |
| [sn] Nominal Sensing Distance | 4 mm |
| Differential Travel | 1...15% of Sr |
| Discrete Output Function | 1 NC |
| Front Material | PPS |
| Maximum Delay First Up | 10 ms |
| Maximum Delay Recovery | 0.2 ms |
| Operating Zone | 0-3.2 mm |
| Output Circuit Type | DC |
| Sensing Range | > 2.5...4 mm |
| Sensor Design | cylindrical M12 |
| Sensor Name | XS6 |
| Threaded Length | 42 mm |
| Type of Output Signal | discrete |
| Wiring Technique | 3-wire |
| Switching capacity in mA | <= 200 mA DC with overload and short-circuit protection |
| Switching Frequency | <= 2500 Hz |
| Current Consumption | <= 10 mA no-load |
| Discrete Output Type | PNP |
| Marking | CE |
| Range of Product | Telemecanique Inductive proximity sensors XS |
| Shock Resistance | 50 gn for 11 ms conforming to IEC 60068-2-27 |
| Vibration Resistance | 25 gn amplitude = +/- 2 mm (f = 10-55 Hz) conforming to IEC 60068-2-6 |
| Electrical Connection | male connector M12, 4 pins |
| Body Type | fixed |
| Maximum Voltage Drop | <2 V (closed) |
| Device Application | mobile equipment |
| 30 |
Seller Information
Documents
Extended Warranty
Reviews
Write Your Own Review