Activity |
IDVSD |
[us] Rated Supply Voltage |
380...460 V - 15...10 % |
Ambient Air Temperature for Operation |
-10-55 °C without derating, 55-60 °C protective cover from the top of the drive removed with current derating 2.2 % per °C |
Ambient Air Temperature for Storage |
-25-70 °C |
Weight (in Kg) |
2.6 kg |
Motor Power kW |
3 kW |
Power Dissipation in W |
508.9 W at In, 80.24 W at In |
Device Short Name |
ATV310 |
Product or Component Type |
variable speed drive |
Product Specific Application |
simple machine |
Range of Product |
Easy Altivar 310 |
Assembly Style |
with heat sink |
Communication Port Protocol |
Modbus |
Connector Type |
RJ45 (on front face) for Modbus |
Discrete Input Number |
4 |
Discrete Input Type |
programmable LI1...LI4 24 V 18...30 V |
Discrete Output Number |
2 |
Discrete Output Type |
logic output LO+, LO-, protected relay output R1A, R1B, R1C 1 C/O |
Height |
184 mm |
Electromagnetic Compatibility |
electrical fast transient/burst immunity test - test level: level 4 conforming to EN/IEC 61000-4-4, electrostatic discharge immunity test - test level: level 3 conforming to EN/IEC 61000-4-2, immunity to conducted disturbances - test level: level 3 conforming to EN/IEC 61000-4-6, radiated radio-frequency electromagnetic field immunity test - test level: level 3 conforming to EN/IEC 61000-4-3, voltage dips and interruptions immunity test conforming to EN/IEC 61000-4-11, surge immunity test - test level: level 3 conforming to EN/IEC 61000-4-5 |
Minimum Switching Current |
5 mA at 24 V DC for logic relay |
Network Number of Phases |
three phase |
Net Weight |
1.8 kg |
Noise Level |
50 dB |
Operating Position |
vertical +/- 10 degree |
Operating Altitude |
<= 1000 m without derating |
Supply Frequency |
50/60 Hz +/- 5 % |
Transmission Rate |
4800 bit/s, 9600 bit/s, 19200 bit/s, 38400 bit/s |
Maximum Switching Current |
2 A at 250 V AC on inductive load cos phi = 0.4 L/R = 7 ms for logic relay, 2 A at 30 V DC on inductive load cos phi = 0.4 L/R = 7 ms for logic relay, 3 A at 250 V AC on resistive load cos phi = 1 L/R = 0 ms for logic relay, 4 A at 30 V DC on resistive load cos phi = 1 L/R = 0 ms for logic relay |
Protection Type |
line supply overvoltage, line supply undervoltage, overcurrent between output phases and earth, overheating protection, short-circuit between motor phases, against input phase loss in three-phase, thermal motor protection via the drive by continuous calculation of I²t |
Depth |
151 mm |
Width |
140 mm |
Standards |
EN/IEC 61800-3 |
Discrete Input Logic |
negative logic (sink), > 16 V (state 0), < 10 V (state 1), input impedance 3.5 kOhm, positive logic (source), 0...< 5 V (state 0), > 11 V (state 1) |