Name: soft starter for asynchronous motor - ATS01 - 12 A - 380..415V - 5.5 KW
Brand: Schneider Electric
SKU: ATS01N212QN
Availability: InStock

soft starter for asynchronous motor - ATS01 - 12 A - 380..415V - 5.5 KW

ATS01N212QN

Be the first one to review this.

QAR 0.00

Excl. Tax

To View the best prices please Sign in / Register.

Activity	IDVSD
Part Number	ATS01N212QN
[Uc] control circuit voltage	built into the starter
[Us] rated supply voltage	380...415 V - 10...10 %
ambient air temperature for storage	-25-70 °C conforming to EN/IEC 60947-4-2
compatibility code	ATS01N2
current consumption	60 A at nominal load
depth	131 mm
device short name	ATS01
operating altitude	<= 1000 m without derating, > 1000 m with current derating of 2.2 % per additional 100 m
operating position	vertical +/- 10 degree
output voltage	<= power supply voltage
pollution degree	2 conforming to EN/IEC 60947-4-2
power dissipation in W	4 W at full load and at end of starting, 124 W in transient state
power range	4-6 kW at 380-440 V 3 phases
product certifications	B44.1-96/ASME A17.5 for starter wired to the motor delta terminal, CCC, UL, GOST, CSA, C-Tick
product or component type	soft starter
range of product	Altistart 01
relative humidity	5-95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
shock resistance	15 gn for 11 ms conforming to EN/IEC 60068-2-27
supply voltage limits	342-456 V
tightening torque	1.9-2.5 N.m, 0.5-0.5 N.m
utilisation category	AC-53B conforming to EN/IEC 60947-4-2
width	45 mm
IcL starter rating	12:00 AM
Discrete output current	2 A DC-13, 3 A AC-15
Type of start	start with voltage ramp
Starting time	adjustable from 1 to 10 s
Assembly style	with heat sink
Starting torque	30...80 % of starting torque of motor connected directly on the line supply
Supply frequency	50...60 Hz - 5...5 %
Discrete input voltage	24...40 V
Discrete input type	logic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
Discrete output type	open collector logic LO1 end of starting signal, relay outputs R1A, R1C NO
Maximum switching current	relay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive load, relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load
Discrete input logic	positive LI1, LI2, BOOST at State 0: < 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA
Discrete output voltage	24 V (voltage limits: 6...30 V) open collector logic
Deceleration time symb	adjustable from 1 to 10 s
vibration resistance	1 gn (f= 13-150 Hz) conforming to EN/IEC 60068-2-6, 1.5 mm peak to peak (f= 3-13 Hz) conforming to EN/IEC 60068-2-6
ambient air temperature for operation	-10-40 °C (without derating), 40-50 °C (with current derating of 2 % per °C)
standards	EN/IEC 60947-4-2
Display Type	1 LED (green) for starter powered up, 1 LED (yellow) for nominal voltage reached