soft starter for asynchronous motor - ATS01 - 32 A - 380..415V - 15 KW
ATS01N232QN
OMRÂ 161.267
OMRÂ 93.571
Excl. Tax
To View the best prices please Sign in / Register.
Loading...
All Sellers
ATS01N232QN
soft starter for asynchronous motor - ATS01 - 32 A - 380..415V - 15 KW
| Seller | Price | Delivery | Shipping Cost | |
|---|---|---|---|---|
|
View Seller Profile
B2B Network
|
|
Shipping Cost
Free Shipping
|
No sellers found for this product.
Out of stock
soft starter for asynchronous motor - ATS01 - 32 A - 380..415V - 15 KW
OMRÂ 161.267
OMRÂ 93.571
Description
How to Video
Product Details
| Activity | IDVSD |
|---|---|
| Part Number | ATS01N232QN |
| [Uc] control circuit voltage | built into the starter |
| [Us] rated supply voltage | 380...415 V - 10...10 % |
| ambient air temperature for storage | -25-70 °C conforming to EN/IEC 60947-4-2 |
| compatibility code | ATS01N2 |
| current consumption | 160 A at nominal load |
| depth | 131 mm |
| device short name | ATS01 |
| operating altitude | <= 1000 m without derating, > 1000 m with current derating of 2.2 % per additional 100 m |
| operating position | vertical +/- 10 degree |
| output voltage | <= power supply voltage |
| pollution degree | 2 conforming to EN/IEC 60947-4-2 |
| power dissipation in W | 4.5 W at full load and at end of starting, 324.5 W in transient state |
| power range | 15-25 kW at 380-440 V 3 phases |
| product certifications | C-Tick, CSA, CCC, GOST, UL, B44.1-96/ASME A17.5 for starter wired to the motor delta terminal |
| product or component type | soft starter |
| range of product | Altistart 01 |
| relative humidity | 5-95 % without condensation or dripping water conforming to EN/IEC 60068-2-3 |
| shock resistance | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 |
| supply voltage limits | 342-456 V |
| tightening torque | 0.5-0.5 N.m, 1.9-2.5 N.m |
| utilisation category | AC-53B conforming to EN/IEC 60947-4-2 |
| width | 45 mm |
| IcL starter rating | 32 A |
| Discrete output current | 2 A DC-13, 3 A AC-15 |
| Type of start | start with voltage ramp |
| Starting time | adjustable from 1 to 10 s, 1 s / 50 , 10 s / 5 , 5 s / 10 |
| Assembly style | with heat sink |
| Starting torque | 30...80 % of starting torque of motor connected directly on the line supply |
| Supply frequency | 50...60 Hz - 5...5 % |
| Discrete input voltage | 24...40 V |
| Discrete input type | logic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm |
| Discrete output type | open collector logic LO1 end of starting signal, relay outputs R1A, R1C NO |
| Maximum switching current | relay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive load, relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load |
| Discrete input logic | positive LI1, LI2, BOOST at State 0: < 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA |
| Discrete output voltage | 24 V (voltage limits: 6...30 V) open collector logic |
| Deceleration time symb | adjustable from 1 to 10 s |
| vibration resistance | 1 gn (f= 13-150 Hz) conforming to EN/IEC 60068-2-6, 1.5 mm peak to peak (f= 3-13 Hz) conforming to EN/IEC 60068-2-6 |
| ambient air temperature for operation | -10-40 °C (without derating), 40-50 °C (with current derating of 2 % per °C) |
| standards | EN/IEC 60947-4-2 |
| Display Type | 1 LED (green) for starter powered up, 1 LED (yellow) for nominal voltage reached |
Seller Information
Documents
Extended Warranty
Reviews
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account