discrete output module X80 - 16 outputs - solid state - 24 V DC positive
BMXDDO1602
OMRÂ 149.720
Excl. Tax
To View the best prices please Sign in / Register.
Loading...
All Sellers
BMXDDO1602
discrete output module X80 - 16 outputs - solid state - 24 V DC positive
| Seller | Price | Delivery | Shipping Cost | |
|---|---|---|---|---|
|
View Seller Profile
B2B Network
|
|
Shipping Cost
Free Shipping
|
No sellers found for this product.
Out of stock
discrete output module X80 - 16 outputs - solid state - 24 V DC positive
OMRÂ 149.720
Product Details
| Activity | IDPAC |
|---|---|
| Part Number | BMXDDO1602 |
| ambient air temperature for storage | -40-85 °C |
| dielectric strength | 1500 V AC at 50/60 Hz 1 minute, output/ground, 1500 V AC at 50/60 Hz 1 minute, output/internal logic |
| IP degree of protection | IP20 |
| net weight | 0.12 kg |
| operating altitude | 0...2000 m, 2000...5000 m with derating factor |
| power dissipation in W | 4 W |
| product or component type | discrete output module |
| range of product | Modicon X80 |
| relative humidity | 5-95 % at 55-55 °C without condensation |
| shock resistance | 30 gn |
| Discrete output current | 0.5 A |
| MTBF reliability | 410000 H |
| Voltage detection threshold | < 14 V DC preactuator fault, > 18 V DC preactuator at state 0 |
| Typical current consumption | 79 mA at 3.3 V DC |
| Discrete output type | solid state |
| Reverse polarity protection | reverse mounted diode |
| Discrete output number | 16 conforming to EN/IEC 61131-2 |
| Maximum voltage drop | <1.2 V at state 1 |
| Maximum tungsten load | 6 W |
| Maximum leakage current | 0.5 mA at state 0 |
| Discrete output logic | positive |
| Discrete output voltage | 24 V 19...30 V DC |
| Load impedance ohmic | > 48 Ohm |
| Paralleling of outputs | yes : 2 maximum |
| Maximum current per module | 10:00 AM |
| Current per channel | 0.625 A |
| Output overvoltage protection | with transil diode |
| Output short-circuit protection | with 2 A external fuse |
| Output overload protection | with electronic circuit breaker 1.5 In < Id < 2 In, with current limiter |
| Response time on output | 1.2 ms |
| vibration resistance | 3 gn |
| status LED | 1 LED (green) module operating (RUN), 1 LED per channel (green) channel diagnostic, 1 LED (red) module error (ERR), 1 LED (red) module I/O |
| ambient air temperature for operation | 0-60 °C |
| insulation resistance | > 10 MOhm 500 V DC |
| Directives | 2014/35/EU - low voltage directive, 2014/30/EU - electromagnetic compatibility |
| Switching Frequency | 0.5/LI² Hz |
Seller Information
Documents
Extended Warranty
Reviews
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account