soft starter-ATS22-control 220V-power 230V(7.5kW)/400...440V(15kW)

Name: soft starter-ATS22-control 220V-power 230V(7.5kW)/400...440V(15kW)
Brand: Schneider Electric
SKU: ATS22D32Q
Price: 326.247828 KWD
Availability: InStock

ATS22D32Q

Be the first one to review this.

Excl. Tax

To View the best prices please Sign in / Register.

Customizable Options:

Extended Warranty

soft starter-ATS22-control 220V-power 230V(7.5kW)/400...440V(15kW)

Product Details

Activity	IDVSD
Part Number	ATS22D32Q
[Uc] control circuit voltage	230 V - 15...10 % 50/60 Hz
[Us] rated supply voltage	230...440 V - 15...10 %
ambient air temperature for storage	-25-70 °C
depth	169 mm
height	265 mm
IP degree of protection	IP20
marking	CE
minimum switching current	100 mA at 12 V DC (relay outputs)
motor power kW	15 kW 400 V, 15 kW 440 V, 7.5 kW 230 V
motor starter type	soft starter
net weight	7 kg
network frequency	45...66 Hz
operating altitude	<= 1000 m without derating, > 1000...< 2000 m with current derating of 2.2 % per additional 100 m
operating position	vertical +/- 10 degree
pollution degree	level 2 conforming to IEC 60664-1
power dissipation in W	44 W for standard applications
power range	7-11 kW at 200-240 V 3 phases, 15-25 kW at 380-440 V 3 phases
product certifications	GOST, C-Tick, UL, CCC, CSA
product or component type	soft starter
range of product	Altistart 22
relative humidity	0-95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
shock resistance	15 gn for 11 ms conforming to EN/IEC 60068-2-27
supply voltage limits	195-484 V
utilisation category	AC-53A
width	130 mm
IcL starter rating	32 A for connection in the motor supply line for standard applications
Type of start	start with torque control (current limited to 3.5 In)
Assembly style	with heat sink
Supply frequency	50...60 Hz - 10...10 %
Type of cooling	forced convection
Discrete input voltage	24 V <= 30 V
Discrete input number	3
Discrete input type	(LI1, LI2, LI3) logic, 5 mA 4.3 kOhm
Discrete output type	relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O, relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
Maximum switching current	5 A 250 V AC resistive 1 relay outputs, 5 A 30 V DC resistive 1 relay outputs, 2 A 250 V AC inductive 0.4 20 ms relay outputs, 2 A 30 V DC inductive 7 ms relay outputs
Discrete output number	2
Discrete input logic	positive logic LI1, LI2, LI3 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA
Transmission rate	4800, 9600 or 19200 bps
Device connection	in the motor supply line, to the motor delta terminals
Component name	ATS22
Installed device	31
Communication data link	serial
PTC probe input	750 Ohm
Control circuit consumption	20 W
Factory setting current	28.5 A
vibration resistance	1 gn (f= 13-200 Hz) conforming to EN/IEC 60068-2-6, 1.5 mm (f= 2-13 Hz) conforming to EN/IEC 60068-2-6
electromagnetic compatibility	conducted and radiated emissions level A conforming to IEC 60947-4-2, damped oscillating waves level 3 conforming to IEC 61000-4-12, electrostatic discharge level 3 conforming to IEC 61000-4-2, immunity to electrical transients level 4 conforming to IEC 61000-4-4, immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3, voltage/current impulse level 3 conforming to IEC 61000-4-5
ambient air temperature for operation	-10-40 °C (without derating), 40-60 °C (with current derating 2.2 % per °C)
standards	EN/IEC 60947-4-2
Network Number of Phases	3 phases
Function Available	internal bypass
Communication Port Protocol	Modbus
Connector Type	1 RJ45
Noise Level	45 dB

Seller Information

Documents

Product Environmental

User Guide

Catalogue

Extended Warranty

Extended Warranty Terms and Conditions

To ensure your product is covered under our extended warranty program, it is the customer's responsibility to register the asset upon receiving the product. Failure to complete the registration will result in the product not being eligible for the extended warranty.

Please follow the steps outlined in the attached PDF document to complete your registration. The registration must be completed to activate your warranty coverage. We appreciate your cooperation in this process.

Extended Warranty