| Activity |
IDSIG |
| Part Number |
RE22R2CMR |
| Rated current |
5:00 AM |
| [Uc] control circuit voltage |
24...240 V |
| [Uimp] rated impulse withstand voltage |
5 kV for 1.2-50 µs conforming to IEC 60664-1 |
| [Us] rated supply voltage |
24...240 V AC/DC 50/60 Hz |
| ambient air temperature for storage |
-40-70 °C |
| connections - terminals |
screw connectors |
| control type |
rotary knob, diagnostic button |
| device short name |
RE22 |
| dielectric strength |
2.5 kV for 1 mA/1 minute at 50 Hz between relay output and power supply with basic insulation conforming to IEC 61812-1 |
| input voltage |
<= 2.4 V |
| IP degree of protection |
IP40 housing: conforming to IEC 60529, IP20 terminals: conforming to IEC 60529, IP50 front panel: conforming to IEC 60529 |
| maximum switching voltage |
250 V AC |
| mechanical durability |
10000000 cycles |
| minimum switching current |
10 mA at 5 V DC |
| mounting position |
any position |
| mounting support |
35 mm DIN rail conforming to EN/IEC 60715 |
| net weight |
0.105 kg |
| overvoltage category |
III conforming to IEC 60664-1 |
| pollution degree |
3 conforming to IEC 60664-1 |
| product certifications |
CSA, CCC, RCM, CE, GL, UL, EAC |
| product or component type |
single function relay |
| range of product |
Harmony Timer Relays |
| relative humidity |
95-95 % at 25-55 °C |
| shock resistance |
15 gn not operating for 11 ms conforming to IEC 60068-2-27, 5 gn in operation for 11 ms conforming to IEC 60068-2-27 |
| tightening torque |
0.6-1 N.m conforming to IEC 60947-1 |
| width |
22.5 mm |
| contacts type and composition |
2 C/O |
| Supply frequency |
50...60 Hz +/- 5 % |
| Reset time |
120 ms on de-energisation |
| Immunity to microbreaks |
10 ms |
| Power consumption in VA |
3-3 VA at 240 V AC |
| Voltage range |
0.85...1.1 Us |
| Temperature drift |
+/- 0.05 %/°C |
| Creepage distance |
4 kV/3 conforming to IEC 60664-1 |
| Switching capacity in VA |
2000 VA |
| Voltage drift |
+/- 0.2 %/V |
| Time delay range |
10...100 s, 3...30 h, 1...10 s, 3...30 s, 30...300 h, 0.3...3 s, 0.05...1 s, 30...300 min, 30...300 s, 3...30 min |
| Nominal output current |
8:00 AM |
| Housing material |
self-extinguishing |
| Output type |
relay |
| Time delay type |
C |
| Repeat accuracy |
+/- 0.5 % conforming to IEC 61812-1 |
| Discrete output type |
relay |
| Setting accuracy of time delay |
+/- 10 % of full scale at 25 °C conforming to IEC 61812-1 |
| Maximum delay response |
100 ms |
| Minimum pulse duration |
100 ms with load in parallel, 30 ms |
| Maximum switching current |
8:00 AM |
| Functionality |
off-delay timing |
| vibration resistance |
20 m/s² (f= 10-150 Hz) conforming to IEC 60068-2-6 |
| status LED |
LED backlight green (steady) for dial pointer indication, LED yellow (steady) for output relay energised, LED yellow (fast flashing) for timing in progress and output relay de-energised, LED yellow (slow flashing) for timing in progress and output relay energised |
| electromagnetic compatibility |
fast transients immunity test - test level: 1 kV level 3 (capacitive connecting clip) conforming to IEC 61000-4-4, surge immunity test - test level: 1 kV level 3 (differential mode) conforming to IEC 61000-4-5, surge immunity test - test level: 2 kV level 3 (common mode) conforming to IEC 61000-4-5, electrostatic discharge - test level: 6 kV level 3 (contact discharge) conforming to IEC 61000-4-2, electrostatic discharge - test level: 8 kV level 3 (air discharge) conforming to IEC 61000-4-2, radiated radio-frequency electromagnetic field immunity test - test level: 10 V/m level 3 (80 MHz...1 GHz) conforming to IEC 61000-4-3, conducted RF disturbances - test level: 10 V level 3 (0.15...80 MHz) conforming to IEC 61000-4-6, fast transient bursts - test level: 2 kV level 3 (direct contact) conforming to IEC 61000-4-4, immunity to microbreaks and voltage drops - test level: 30 % (500 ms) conforming to IEC 61000-4-11, immunity to microbreaks and voltage drops - test level: 100 % (20 ms) conforming to IEC 61000-4-11 |
| ambient air temperature for operation |
-20-60 °C |
| standards |
UL 508, IEC 61812-1 |
| safety reliability data |
MTTFd = 251.1 years, B10d = 230000 |
| insulation resistance |
100 MOhm at 500 V DC conforming to IEC 60664-1 |
| Directives |
2006/95/EC - low voltage directive, 2004/108/EC - electromagnetic compatibility |
| Electrical Durability |
100000 cycles, 8 A at 250 V, AC-1, 100000 cycles, 2 A at 24 V, DC-1 |
