TESYS U MODBUS COMMS MODULE
Further offers for this product
Inclusive of all Taxes
In Stock
No sellers found for this product.
Inclusive of all Taxes
TESYS U MODBUS COMMS MODULE
- Specifications
- Environmental Data
- Documents
- Reviews
Overview
| Product Name | TESYS U MODBUS COMMS MODULE |
|---|---|
| Tax Class | GST-18 |
| Country of Origin | France |
| Manufacturer | Schneider Electric |
| Range | TESYS |
| Device short name | LUL |
| Product or component type | COMMUNICATION MODULE |
| Product compatibility | LUCLLUCCLUCBLUCMLUCALUCD |
| Device application | COMMUNICATION |
| Range compatibility | TESYS TESYS U LUB NON REVERSING POWER BASETESYS TESYS U LU2B REVERSING POWER BASE |
| main function available | COMMUNICATION MODULE |
| Mounting mode | PLUG-IN |
| Mounting location | FRONT SIDE |
| Physical interface | RS485 MULTIDROP |
| Bus type | MODBUS |
| Cable connector type | RJ45 FRONT PANEL |
| Communication port protocol | MODBUS RTU |
| Addressing | 0...31 |
| Transmission rate | 19200 BIT/S |
| Return time | 30 MS |
| Number of inputs | 2 |
| Logic input | POSITIVE AT 24 V DC - 7 MA |
| Response time | 10 MS +/- 30 % CHANGE TO STATE 010 MS +/- 30 % CHANGE TO STATE 1 |
| Input type | RESISTIVE |
| Number of outputs | 2 DEDICATED TO STARTER-CONTROLLER COIL OPERATION1 |
| [Us] rated supply voltage | 24 V DC |
| Protection type | GG FUSE 1 A |
| Switching current capacity | 0.5 MA AT 24 V |
| Local signalling | 3 LEDS FRONT PANEL |
| Connection pitch | 3.81 MM |
| Connections - terminals | SCREW CLAMP TERMINALS 1 CABLE(S) 0.14…1 MM²FLEXIBLE WITHOUT CABLE ENDSCREW CLAMP TERMINALS 1 CABLE(S) 0.14…1 MM²RIGID WITHOUT CABLE ENDSCREW CLAMP TERMINALS 1 CABLE(S) 0.25…0.5 MM²FLEXIBLE WITH CABLE ENDSCREW CLAMP TERMINALS 1 CABLE(S) 0.25…1 MM²FLEXIBLE WITH CABLE ENDSCREW CLAMP TERMINALS 2 CABLE(S) 0.14…0.5 MM²RIGID WITHOUT CABLE ENDSCREW CLAMP TERMINALS 2 CABLE(S) 0.14…0.75 MM²FLEXIBLE WITHOUT CABLE ENDSCREW CLAMP TERMINALS 2 CABLE(S) 0.25…0.34 MM²FLEXIBLE WITH CABLE ENDSCREW CLAMP TERMINALS 2 CABLE(S) 0.5 MM²FLEXIBLE WITH CABLE END |
| Associated cable type | AWG 26...AWG 16 |
| Tightening torque | 0.2…0.25 N.M2.5 MM |
| Net weight | 0.08 KG |
| Ambient air temperature for operation | -25…55 °C |
| IP degree of protection | IP20 CONFORMING TO IEC 60529 |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 4.9 CM |
| Package 1 Width | 11.3 CM |
| Package 1 Length | 4.9 CM |
| Package 1 Weight | 85.0 G |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 35 |
| Package 2 Height | 15.0 CM |
| Package 2 Width | 30.0 CM |
| Package 2 Length | 40.0 CM |
| Package 2 Weight | 3.293 KG |
| Warranty (in months) | 18 |
Environmental data
Schneider Electric aims to achieve Net Zero status by 2050 through supply chain partnerships, lower impact materials, and circularity via our ongoing "Use Better, Use Longer, Use Again" campaign to extend product lifetimes and recyclability.
| Sustainability | Green PremiumTM label is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products. Guide to assessing product sustainability is a white paper that clarifies global eco-label standards and how to interpret environmental declarations. |
|---|---|
| Sustainable packaging | ✓ |
| Take-back | No |
| Mercury free | ✓ |
| Halogen-free status | Halogen free plastic parts product |
| Environmental Disclosure | Product Environmental Profile (Download) |
| End of life manual availability | End of Life Information (Download) |
| SCIP Number | E383808a-7832-4e0a-8697-e499929809d4 |
| REACh Regulation | Reference contains Substances of Very High Concern above the threshold (Download) |
| EU RoHS Directive | Compliant By Exemption (Download) |
| WEEE Label | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins |
Documents
Reviews
Overview
| Product Name | TESYS U MODBUS COMMS MODULE |
|---|---|
| Tax Class | GST-18 |
| Country of Origin | France |
| Manufacturer | Schneider Electric |
| Range | TESYS |
| Device short name | LUL |
| Product or component type | COMMUNICATION MODULE |
| Product compatibility | LUCLLUCCLUCBLUCMLUCALUCD |
| Device application | COMMUNICATION |
| Range compatibility | TESYS TESYS U LUB NON REVERSING POWER BASETESYS TESYS U LU2B REVERSING POWER BASE |
| main function available | COMMUNICATION MODULE |
| Mounting mode | PLUG-IN |
| Mounting location | FRONT SIDE |
| Physical interface | RS485 MULTIDROP |
| Bus type | MODBUS |
| Cable connector type | RJ45 FRONT PANEL |
| Communication port protocol | MODBUS RTU |
| Addressing | 0...31 |
| Transmission rate | 19200 BIT/S |
| Return time | 30 MS |
| Number of inputs | 2 |
| Logic input | POSITIVE AT 24 V DC - 7 MA |
| Response time | 10 MS +/- 30 % CHANGE TO STATE 010 MS +/- 30 % CHANGE TO STATE 1 |
| Input type | RESISTIVE |
| Number of outputs | 2 DEDICATED TO STARTER-CONTROLLER COIL OPERATION1 |
| [Us] rated supply voltage | 24 V DC |
| Protection type | GG FUSE 1 A |
| Switching current capacity | 0.5 MA AT 24 V |
| Local signalling | 3 LEDS FRONT PANEL |
| Connection pitch | 3.81 MM |
| Connections - terminals | SCREW CLAMP TERMINALS 1 CABLE(S) 0.14…1 MM²FLEXIBLE WITHOUT CABLE ENDSCREW CLAMP TERMINALS 1 CABLE(S) 0.14…1 MM²RIGID WITHOUT CABLE ENDSCREW CLAMP TERMINALS 1 CABLE(S) 0.25…0.5 MM²FLEXIBLE WITH CABLE ENDSCREW CLAMP TERMINALS 1 CABLE(S) 0.25…1 MM²FLEXIBLE WITH CABLE ENDSCREW CLAMP TERMINALS 2 CABLE(S) 0.14…0.5 MM²RIGID WITHOUT CABLE ENDSCREW CLAMP TERMINALS 2 CABLE(S) 0.14…0.75 MM²FLEXIBLE WITHOUT CABLE ENDSCREW CLAMP TERMINALS 2 CABLE(S) 0.25…0.34 MM²FLEXIBLE WITH CABLE ENDSCREW CLAMP TERMINALS 2 CABLE(S) 0.5 MM²FLEXIBLE WITH CABLE END |
| Associated cable type | AWG 26...AWG 16 |
| Tightening torque | 0.2…0.25 N.M2.5 MM |
| Net weight | 0.08 KG |
| Ambient air temperature for operation | -25…55 °C |
| IP degree of protection | IP20 CONFORMING TO IEC 60529 |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 4.9 CM |
| Package 1 Width | 11.3 CM |
| Package 1 Length | 4.9 CM |
| Package 1 Weight | 85.0 G |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 35 |
| Package 2 Height | 15.0 CM |
| Package 2 Width | 30.0 CM |
| Package 2 Length | 40.0 CM |
| Package 2 Weight | 3.293 KG |
| Warranty (in months) | 18 |
Environmental data
Schneider Electric aims to achieve Net Zero status by 2050 through supply chain partnerships, lower impact materials, and circularity via our ongoing "Use Better, Use Longer, Use Again" campaign to extend product lifetimes and recyclability.
| Sustainability | Green PremiumTM label is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products. Guide to assessing product sustainability is a white paper that clarifies global eco-label standards and how to interpret environmental declarations. |
|---|---|
| Sustainable packaging | ✓ |
| Take-back | No |
| Mercury free | ✓ |
| Halogen-free status | Halogen free plastic parts product |
| Environmental Disclosure | Product Environmental Profile (Download) |
| End of life manual availability | End of Life Information (Download) |
| SCIP Number | E383808a-7832-4e0a-8697-e499929809d4 |
| REACh Regulation | Reference contains Substances of Very High Concern above the threshold (Download) |
| EU RoHS Directive | Compliant By Exemption (Download) |
| WEEE Label | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins |