calcPageSize())"
/>
Further offers for this product
Incl. Tax
No sellers found for this product.
Incl. Tax
EasyCan Capacitor - 12.5/15 kvar - 400 V - 50/60Hz
- Description
- Specifications
- Environmental Data
- Documents
- Reviews
Description
EasyCan capacitor are designed to work in slightly polluted netwroks with Detuned reactors. These capacitors are used for standard operating conditions, and when no significant non-linear loads are present. These capacitor are the right choice to maximize the savings in an electrical system which is stable. This capacitor provides a rated output power of 11.3 kVar at 380V AC, 50 Hz. Fastening assured by a ClampTite terminal. This component meet the standards IEC 60831-1 and IEC 60831-2. The case product weight is 1.3 kg.
Overview
| Brand | Schneider Electric |
|---|---|
| Height | 13.5 |
| Length | 35.5 |
| Width | 13.5 |
| Range | EASYLOGIC |
| Product or component type | STANDARD DUTY CAPACITOR |
| Product name | EASYLOGIC PFC CAPACITOR |
| Network frequency | 50/60 HZ |
| Series name | EASYLOGIC PFC CAPACITOR |
| Electrical parameters | 11.3 KVAR 380 V 50 HZ13.5 KVAR 380 V 60 HZ12.5 KVAR 400 V 50 HZ15 KVAR 400 V 60 HZ13.5 KVAR 415 V 50 HZ16.1 KVAR 415 V 60 HZ |
| Maximum permissible voltage | 1.1 X UN (8 HOURS OVER 24 HOURS) |
| continuous overcurrent capacity | 1.5 X IN |
| Rated voltage | 380…415 V AC 50/60 HZ |
| Dielectric losses | < 0.2 W/KVAR |
| Power losses | < 0.5 W/KVAR |
| Capacitance tolerance | - 5 % TO 10 % |
| Voltage test | 2.15 X UN AC BETWEEN TERMINALS FOR 10 S= 660 V - 6 KV AC BETWEEN TERMINAL AND CONTAINER FOR 10 S |
| Inrush current | 200 X IN |
| Maximum switching operation per year | 5000 |
| Service life in hours | 100000 H |
| Dielectric material | METALLIZED POLYPROPYLENE FILM WITH ZN/AL ALLOY, |
| Impregnation material | NON-PCB SOFT PUR RESINBIODEGRADABLE |
| Type of installation | INDOOR INSTALLATION |
| Connections - terminals | CLAMPTITE TERMINAL |
| Mounting mode | VERTICAL |
| Diameter | 75 MM |
| Height | 308 MM |
| Net weight | 1.3 KG |
| Standards | IEC 60831-2IEC 60831-1 |
| IP degree of protection | IP20 |
| Operating altitude | 2000 M |
| Temperature class | D |
| Ambient air temperature for operation | -25…55 °C |
| Relative humidity | 95 % |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 13.500 CM |
| Package 1 Width | 13.500 CM |
| Package 1 Length | 35.500 CM |
| Package 1 Weight | 1.732 KG |
| Unit Type of Package 2 | S04 |
| Number of Units in Package 2 | 8 |
| Package 2 Height | 30.000 CM |
| Package 2 Width | 40.000 CM |
| Package 2 Length | 60.000 CM |
| Package 2 Weight | 15.155 KG |
| Unit Type of Package 3 | P06 |
| Number of Units in Package 3 | 32 |
| Package 3 Height | 75.000 CM |
| Package 3 Width | 60.000 CM |
| Package 3 Length | 80.000 CM |
| Package 3 Weight | 68.932 KG |
| Warranty (in months) | 18 |
Environmental data
Schneider Electric aims to achieve Net Zero status by 2050 through supply chain partnerships, lower impact materials, and circularity via our ongoing "Use Better, Use Longer, Use Again" campaign to extend product lifetimes and recyclability.
| Sustainability | Green PremiumTM label is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products. Guide to assessing product sustainability is a white paper that clarifies global eco-label standards and how to interpret environmental declarations. |
|---|---|
| Sustainable packaging | ✓ |
| Take-back | No |
| REACh free of SVHC | ✓ |
| RoHS exemption information | Yes (Download) |
| REACh Regulation | REACh Declaration (Download) |
| EU RoHS Directive | EU RoHS Declaration (Download) |
| Environmental Disclosure | Product Environmental Profile (Download) |
| End of life manual availability | End of Life Information (Download) |
| Recyclability potential, in % | 6 |
| Total lifecycle Carbon footprint | 219 kg CO2 eq. |
| Carbon footprint of the manufacturing phase [A1 to A3] | 21.37791954533109 |
| Carbon footprint of the manufacturing phase [A1 to A3] | 21 kg CO2 eq. |
| Carbon footprint of the distribution phase [A4] | 3.3239939084860732 |
| Carbon footprint of the distribution phase [A4] | 3 kg CO2 eq. |
| Carbon footprint of the installation phase [A5] | 0.008685890163523443 |
| Carbon footprint of the installation phase [A5] | 0 kg CO2 eq. |
| Carbon footprint of the use phase [B2, B3, B4, B6] | 187.82380247056582 |
| Carbon footprint of the use phase [B2, B3, B4, B6] | 188 kg CO2 eq. |
| Carbon footprint of the end-of-life phase [C1 to C4] | 6.7100178909761885 |
| Carbon footprint of the end-of-life phase [C1 to C4] | 7 kg CO2 eq. |
| WEEE Label | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins |
Reviews
Description
EasyCan capacitor are designed to work in slightly polluted netwroks with Detuned reactors. These capacitors are used for standard operating conditions, and when no significant non-linear loads are present. These capacitor are the right choice to maximize the savings in an electrical system which is stable. This capacitor provides a rated output power of 11.3 kVar at 380V AC, 50 Hz. Fastening assured by a ClampTite terminal. This component meet the standards IEC 60831-1 and IEC 60831-2. The case product weight is 1.3 kg.
Overview
| Brand | Schneider Electric |
|---|---|
| Height | 13.5 |
| Length | 35.5 |
| Width | 13.5 |
| Range | EASYLOGIC |
| Product or component type | STANDARD DUTY CAPACITOR |
| Product name | EASYLOGIC PFC CAPACITOR |
| Network frequency | 50/60 HZ |
| Series name | EASYLOGIC PFC CAPACITOR |
| Electrical parameters | 11.3 KVAR 380 V 50 HZ13.5 KVAR 380 V 60 HZ12.5 KVAR 400 V 50 HZ15 KVAR 400 V 60 HZ13.5 KVAR 415 V 50 HZ16.1 KVAR 415 V 60 HZ |
| Maximum permissible voltage | 1.1 X UN (8 HOURS OVER 24 HOURS) |
| continuous overcurrent capacity | 1.5 X IN |
| Rated voltage | 380…415 V AC 50/60 HZ |
| Dielectric losses | < 0.2 W/KVAR |
| Power losses | < 0.5 W/KVAR |
| Capacitance tolerance | - 5 % TO 10 % |
| Voltage test | 2.15 X UN AC BETWEEN TERMINALS FOR 10 S= 660 V - 6 KV AC BETWEEN TERMINAL AND CONTAINER FOR 10 S |
| Inrush current | 200 X IN |
| Maximum switching operation per year | 5000 |
| Service life in hours | 100000 H |
| Dielectric material | METALLIZED POLYPROPYLENE FILM WITH ZN/AL ALLOY, |
| Impregnation material | NON-PCB SOFT PUR RESINBIODEGRADABLE |
| Type of installation | INDOOR INSTALLATION |
| Connections - terminals | CLAMPTITE TERMINAL |
| Mounting mode | VERTICAL |
| Diameter | 75 MM |
| Height | 308 MM |
| Net weight | 1.3 KG |
| Standards | IEC 60831-2IEC 60831-1 |
| IP degree of protection | IP20 |
| Operating altitude | 2000 M |
| Temperature class | D |
| Ambient air temperature for operation | -25…55 °C |
| Relative humidity | 95 % |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 13.500 CM |
| Package 1 Width | 13.500 CM |
| Package 1 Length | 35.500 CM |
| Package 1 Weight | 1.732 KG |
| Unit Type of Package 2 | S04 |
| Number of Units in Package 2 | 8 |
| Package 2 Height | 30.000 CM |
| Package 2 Width | 40.000 CM |
| Package 2 Length | 60.000 CM |
| Package 2 Weight | 15.155 KG |
| Unit Type of Package 3 | P06 |
| Number of Units in Package 3 | 32 |
| Package 3 Height | 75.000 CM |
| Package 3 Width | 60.000 CM |
| Package 3 Length | 80.000 CM |
| Package 3 Weight | 68.932 KG |
| Warranty (in months) | 18 |
Environmental data
Schneider Electric aims to achieve Net Zero status by 2050 through supply chain partnerships, lower impact materials, and circularity via our ongoing "Use Better, Use Longer, Use Again" campaign to extend product lifetimes and recyclability.
| Sustainability | Green PremiumTM label is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products. Guide to assessing product sustainability is a white paper that clarifies global eco-label standards and how to interpret environmental declarations. |
|---|---|
| Sustainable packaging | ✓ |
| Take-back | No |
| REACh free of SVHC | ✓ |
| RoHS exemption information | Yes (Download) |
| REACh Regulation | REACh Declaration (Download) |
| EU RoHS Directive | EU RoHS Declaration (Download) |
| Environmental Disclosure | Product Environmental Profile (Download) |
| End of life manual availability | End of Life Information (Download) |
| Recyclability potential, in % | 6 |
| Total lifecycle Carbon footprint | 219 kg CO2 eq. |
| Carbon footprint of the manufacturing phase [A1 to A3] | 21.37791954533109 |
| Carbon footprint of the manufacturing phase [A1 to A3] | 21 kg CO2 eq. |
| Carbon footprint of the distribution phase [A4] | 3.3239939084860732 |
| Carbon footprint of the distribution phase [A4] | 3 kg CO2 eq. |
| Carbon footprint of the installation phase [A5] | 0.008685890163523443 |
| Carbon footprint of the installation phase [A5] | 0 kg CO2 eq. |
| Carbon footprint of the use phase [B2, B3, B4, B6] | 187.82380247056582 |
| Carbon footprint of the use phase [B2, B3, B4, B6] | 188 kg CO2 eq. |
| Carbon footprint of the end-of-life phase [C1 to C4] | 6.7100178909761885 |
| Carbon footprint of the end-of-life phase [C1 to C4] | 7 kg CO2 eq. |
| WEEE Label | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins |