ATS01N212QN

Schneider Electric Altistart 01 soft starter for asynchronous motor - ATS01 - 12 A - 380..415V - 5.5 KW

1/1
ATS01N212QN

Schneider Electric Altistart 01 soft starter for asynchronous motor - ATS01 - 12 A - 380..415V - 5.5 KW

In stock
SKU
ATS01N212QN
Rp ‎ 6.406.920
To View the best prices please sign in or register.
CHECK DELIVERY TIME & COD AVAILABILITY

Add to compare

No sellers found for this product.

Schneider Electric Altistart 01 soft starter for asynchronous motor - ATS01 - 12 A - 380..415V - 5.5 KW

Rp ‎ 6.406.920

Product Documents

Description

This Altistart 01 soft starter is DIN rail mounted and can feed 3-phase asynchronous motors with a rating up to 12A. This Altistart 01 can be used for a motor rated power up to 3kW or 3hp for 3-phase (200V to 240V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 45mm wide, this makes it one of the smallest soft starters on the market; it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Simple setup with only 2 settings: possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.

Product details

  • Activity
    IDVSD
  • Weight (in Kg)
    0.534
  • Net weight
    0.42 kg
  • Operating Position
    vertical +/- 10 degree
  • Output Voltage
    <= power supply voltage
  • Ambient air temperature for operation
    -10-40 °C (without derating)
    40-50 °C (with current derating of 2 % per °C)
  • Minimum Switching Current
    10 mA at 6 V DC for relay outputs
  • Supply Voltage Limits
    342-456 V
  • Supply Frequency
    50...60 Hz - 5...5 %
  • Assembly Style
    with heat sink
  • Network frequency
    47.5...63 Hz
  • Discrete Input Voltage
    24...40 V
  • Motor Starter Type
    soft starter
  • Deceleration Time Symb
    adjustable from 1 to 10 s
  • Icl Starter Rating
    12:00 AM
  • Starting Time
    adjustable from 1 to 10 s
  • Starting Torque
    30...80 % of starting torque of motor connected directly on the line supply
  • Type of Start
    start with voltage ramp
  • Range of Product
    Altistart 01
  • Discrete Output Current
    2 A DC-13
    3 A AC-15
  • Electrical Connection
    4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit
    screw connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit
    screw connector - rigid 1 0.5...2.5 mm² AWG 14 control circuit
    4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit
    screw connector - rigid 2 0.5...1 mm² AWG 17 control circuit
    screw connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit
    4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuit
    screw connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit
    4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit
    4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuit
  • Electromagnetic Compatibility
    conducted and radiated emissions level B conforming to CISPR 11
    immunity to electrical transients level 4 conforming to IEC 61000-4-4
    immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
    micro-cuts and voltage fluctuation conforming to IEC 61000-4-11
    voltage/current impulse level 3 conforming to IEC 61000-4-5
    conducted and radiated emissions level B conforming to IEC 60947-4-2
    damped oscillating waves level 3 conforming to IEC 61000-4-12
    electrostatic discharge level 3 conforming to IEC 61000-4-2
    EMC immunity conforming to EN 50082-1
    EMC immunity conforming to EN 50082-2
    harmonics conforming to IEC 1000-3-2
    harmonics conforming to IEC 1000-3-4
    immunity to conducted interference caused by radio-electrical fields level 3 conforming to IEC 61000-4-6
  • Motor Power Kw
    5.5 kW, 3 phases at 380...415 V
  • Operating altitude
    <= 1000 m without derating
    > 1000 m with current derating of 2.2 % per additional 100 m
  • Power Dissipation in w
    4 W at full load and at end of starting
    124 W in transient state
  • Power Range
    4-6 kW at 380-440 V 3 phases
  • Product Certifications
    B44.1-96/ASME A17.5 for starter wired to the motor delta terminal
    CCC
    UL
    GOST
    CSA
    C-Tick
  • Tightening Torque
    1.9-2.5 N.m
    0.5-0.5 N.m
  • Vibration Resistance
    1 gn (f= 13-150 Hz) conforming to EN/IEC 60068-2-6
    1.5 mm peak to peak (f= 3-13 Hz) conforming to EN/IEC 60068-2-6
  • Discrete Input Type
    logic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
  • Discrete Output Type
    open collector logic LO1 end of starting signal
    relay outputs R1A, R1C NO
  • Display type
    1 LED (green) for starter powered up
    1 LED (yellow) for nominal voltage reached
  • Maximum Switching Current
    relay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive load
    relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load
  • Standards
    EN/IEC 60947-4-2
  • Compatibility code
    ATS01N2
  • Depth
    131 mm
  • Device short name
    ATS01
  • Height
    124 mm
  • IP degree of protection
    IP20
  • Marking
    CE
  • Network Number Of Phases
    3 phases
  • Product destination
    asynchronous motors
  • Relative humidity
    5-95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
  • width
    45 mm
  • Ambient air temperature for storage
    -25-70 °C conforming to EN/IEC 60947-4-2
  • Current Consumption
    60 A at nominal load
  • Function Available
    integrated bypass
  • Pollution degree
    2 conforming to EN/IEC 60947-4-2
  • Product Specific Application
    simple machine
  • Shock Resistance
    15 gn for 11 ms conforming to EN/IEC 60068-2-27
  • Utilisation category
    AC-53B conforming to EN/IEC 60947-4-2
  • Discrete Input Logic
    positive LI1, LI2, BOOST at State 0: < 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA
  • Discrete Output Voltage
    24 V (voltage limits: 6...30 V) open collector logic
  • Brand
    Schneider Electric
more specification
less specification

Seller Information

Reviews

Write Your Own Review
You're reviewing:Schneider Electric Altistart 01 soft starter for asynchronous motor - ATS01 - 12 A - 380..415V - 5.5 KW
Your Rating

* Required Field