XF Closing Voltage Release for Drawout Masterpact NW, 200 VDC to 250 VDC, 200 VAC to 250 VAC 50/60 Hz
48484
Description
This is a XF closing voltage release for drawout Masterpact NW devices. Its rated voltage is 200VDC to 250 VDC or 200VAC to 250 VAC 50/60Hz. It is an auxiliary used for remote closing applications. This auxiliary closes the circuit breaker when the control voltage Un rises above 85% of its rated voltage Un. It complies with IEC 60947-2 standard. Masterpact device can be equipped with 1 MX, 1 XF and 1 MN auxiliaries.
Product Details
| Activity | PPACB |
|---|---|
| [uc] Control Circuit Voltage | 200...250 V AC 50/60 Hz , 200...250 V AC 50/60 Hz , 200...250 V AC 50/60 Hz , 200...250 V DC , 200...250 V DC |
| Control Type | standard |
| Device Application | control |
| Device Short Name | XF |
| Height | 5.000 cm |
| Mounting Mode | drawout |
| Product or Component Type | voltage release |
| Range | MasterPact |
| Range Compatibility | MasterPact NW |
| Range of Product | MasterPact NW |
| Response Time | 70 ms +/- 10 % for MasterPact NW 800 A |
| Supply Holding Power | 4.5 VA |
| Threshold Tripping Voltage | 0.85...1.1 Un closing |
| Voltage Release Type | closing coil |
| Width | 7.500 cm |
| Voltage release type | closing coil|instantaneous voltage release |
| Range | MasterPacT |
| Control Type | standard |
| Range Compatibility | Masterpact MasterPact NW , Masterpact MasterPact NW , Masterpact MasterPact NW DC , Masterpact MasterPact NW DC |
| Range of Product | MasterPact NW|MasterPact NW DC |
| Length | 11.000 cm |
Seller Information
Documents
Extended Warranty
Reviews
Write Your Own Review