LC1D65008M7

TeSys D contactor - 4P(2 NO + 2 NC) - AC-1 <= 440 V 80 A 220 V AC 50/60 Hz coil

1/1
LC1D65008M7

TeSys D contactor - 4P(2 NO + 2 NC) - AC-1 <= 440 V 80 A 220 V AC 50/60 Hz coil

SKU
LC1D65008M7
CHECK DELIVERY TIME & COD AVAILABILITY

Add to compare

No sellers found for this product.

TeSys D contactor - 4P(2 NO + 2 NC) - AC-1 <= 440 V 80 A 220 V AC 50/60 Hz coil

Product details

  • [ie] Rated Operational Current
    80 A (at <60 °C) at <= 440 V AC AC-1 for power circuit
  • [uc] Control Circuit Voltage
    220 V AC 50/60 Hz
  • [ue] Rated Operational Voltage
    power circuit: <= 690 V AC 25...400 Hz
  • [ui] Rated Insulation Voltage
    power circuit: 600 V CSA certified
  • [uimp] Rated Impulse Withstand Voltage
    6 kV conforming to IEC 60947
  • Ambient Air Temperature for Operation
    -40-60 °C
  • Ambient Air Temperature for Storage
    -60-80 °C
  • Climatic Withstand
    conforming to IACS E10
  • Compatibility Code
    LC1D
  • Depth
    125 mm
  • Device Short Name
    LC1D
  • Electrical Durability
    1.4 Mcycles 80 A AC-1 at Ue <= 440 V
  • Fire Resistance
    850 °C conforming to IEC 60695-2-1
  • Flame Retardance
    V1 conforming to UL 94
  • Height
    127 mm
  • Ip Degree of Protection
    IP20 front face conforming to IEC 60529
  • Mechanical Durability
    6 Mcycles
  • Mechanical Robustness
    vibrations contactor open: 2 Gn, 5...300 Hz
  • Mounting Support
    plate
  • Net Weight
    1.45 kg
  • Overvoltage Category
    III
  • Poles Description
    4P
  • Pollution Degree
    3
  • Product Certifications
    RINA
  • Product Name
    TeSys D
  • Product or Component Type
    contactor
  • Range
    TeSys
  • Range of Product
    TeSys D
  • Standards
    CSA C22.2 No 14
  • Tightening Torque
    control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm
  • Utilisation Category
    AC-1
  • Width
    85 mm
  • [icw] Rated Short-time Withstand Current
    520 A 40 °C - 10 s for power circuit
  • Connections - Terminals
    control circuit: screw clamp terminals 2 cable(s) 1-2.5 mm²flexible with cable end
  • [ith] Conventional Free Air Thermal Current
    80 A (at 60 °C) for power circuit
  • Associated Fuse Rating
    125 A gG at <= 690 V coordination type 1 for power circuit
  • Average Impedance
    1.5 mOhm - Ith 80 A 50 Hz for power circuit
  • Coil Technology
    without built-in suppressor module
  • Contact Compatibility
    M1
  • Contactor Application
    resistive load
  • Control Circuit Type
    AC at 50/60 Hz
  • Control Circuit Voltage Limits
    0.3...0.6 Uc (-40-70 °C):drop-out AC 50/60 Hz
  • Heat Dissipation
    4-5 W at 50/60 Hz
  • Hold-in Power Consumption in Va
    13-13 VA 60 Hz cos phi 0.3 (at 20 °C)
  • Inrush Power in Va
    140-140 VA 60 Hz cos phi 0.75 (at 20 °C)
  • Irms Rated Making Capacity
    1000 A at 440 V for power circuit conforming to IEC 60947
  • Maximum Operating Rate
    3600 cyc/h 60 °C
  • Operating Altitude
    0...3000 m
  • Operating Time
    4...19 ms opening
  • Pole Contact Composition
    2 NO + 2 NC
  • Power Dissipation Per Pole
    9.6 W AC-1
  • Protective Cover
    without
  • Protective Treatment
    TH conforming to IEC 60068-2-30
  • Rated Breaking Capacity
    1000 A at 440 V for power circuit conforming to IEC 60947
  • Safety Reliability Level
    B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1
more specification
less specification

Reviews

Write Your Own Review
You're reviewing:TeSys D contactor - 4P(2 NO + 2 NC) - AC-1 <= 440 V 80 A 220 V AC 50/60 Hz coil
Your Rating

* Required Field