29450

standard auxiliary contact, circuit breaker status OF/SD/SDE/SDV, 1 changeover contact type, screwless spring terminals

1/1
29450

standard auxiliary contact, circuit breaker status OF/SD/SDE/SDV, 1 changeover contact type, screwless spring terminals

SKU
29450
CHECK DELIVERY TIME & COD AVAILABILITY

Add to compare

No sellers found for this product.

standard auxiliary contact, circuit breaker status OF/SD/SDE/SDV, 1 changeover contact type, screwless spring terminals

Description

It is a single standard auxiliary contact that provides all the different indications remotely for ComPact NSX, ComPact NS, PowerPact Multistandard and EasyPact CVS circuit breakers. Remote status information are ON/OFF (OF), trip indication (SD) and fault-trip indication (SDE) for all circuit breakers types. The remote status information for trip indication due to an earth fault (SDV) is used for ComPact NSX and PowerPact Multistandard. The contacts are installed in the device in dedicated slots. This auxiliary contact is a common point changeover type contact with 1 normally open contact and 1 normally closed contact. The rated current is 6A and the minimum load is 100mA at 24 VDC for utilization categories are AC12/AC15/DC12/DC14. Screwless connections with spring terminals provide a fast and reliable connection. The section of connected cables is between 0.5 mm² (AWG20) and 1.5 mm² (AWG16). It complies with IEC 60947-5-1 standard.

Product details

  • Activity
    PPCCB
  • [ie] Rated Operational Current
    AC-12: 6 A at 24 V AC 50/60 Hz
  • Accessory / Separate Part Category
    spare part for Compact NS630b...1600
  • Auxiliary Contacts Type
    standard
  • Device Application
    breaker status monitoring
  • Device Short Name
    OF
  • Minimum Load
    100 mA at 24 V DC
  • Mounting Mode
    clip-on
  • Product or Component Type
    auxiliary contact
  • Range
    ComPact
  • Range Compatibility
    ComPact NS630b...1600
  • [ith] Conventional Free Air Thermal Current
    5:00 AM
  • Auxiliary Connection Terminal
    spring 0.5-1.5 mm² (AWG 20...AWG 16)
  • Fault Type
    general electric fault
  • Local Signalling
    ON/OFF indication for open/close
  • Signal Contacts Composition
    1 NO/NC
more specification
less specification

Reviews

Write Your Own Review
You're reviewing:standard auxiliary contact, circuit breaker status OF/SD/SDE/SDV, 1 changeover contact type, screwless spring terminals
Your Rating

* Required Field