soft starter for asynchronous motor - ATS01 - 6 A - 380..415V - 1.5..3 KW

ATS01N206QN
Be the first one to review this.
login_green To View the best prices please Sign in / Register.
Out of stock

Description

This Altistart 01 soft starter is DIN rail mounted and can feed 3-phase asynchronous motors with a rating up to 6A. This Altistart 01 can be used for a motor rated power up to 1.1kW or 1.5hp for 3-phase (200V to 240V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 45mm wide, this makes it one of the smallest soft starters on the market; it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Simple setup with only 2 settings: possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.

Product Details

[uc] Control Circuit Voltage built into the starter
[us] Rated Supply Voltage 380...415 V - 10...10 %
Ambient Air Temperature for Operation -10-40 °C (without derating)
Ambient Air Temperature for Storage -25-70 °C conforming to EN/IEC 60947-4-2
Compatibility Code ATS01N2
Depth 131 mm
Device Short Name ATS01
Display Type 1 LED (green) for starter powered up
Electrical Connection 4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit
Electromagnetic Compatibility conducted and radiated emissions level B conforming to CISPR 11
Function Available integrated bypass
Height 124 mm
Ip Degree of Protection IP20
Marking CE
Net Weight 0.42 kg
Network Frequency 47.5...63 Hz
Network Number of Phases 3 phases
Operating Position vertical +/- 10 degree
Pollution Degree 2 conforming to EN/IEC 60947-4-2
Power Dissipation In W 4 W at full load and at end of starting
Power Range 1.1-2 kW at 380-440 V 3 phases
Product Certifications UL
Product Destination asynchronous motors
Product or Component Type soft starter
Product Specific Application simple machine
Range of Product Altistart 01
Relative Humidity 5-95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
Standards EN/IEC 60947-4-2
Tightening Torque 1.9-2.5 N.m
Utilisation Category AC-53B conforming to EN/IEC 60947-4-2
Width 45 mm
Assembly Style with heat sink
Current Consumption 30 A at nominal load
Deceleration Time Symb adjustable from 1 to 10 s
Discrete Input Logic positive LI1, LI2, BOOST at State 0: < 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA
Discrete Input Type logic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
Discrete Input Voltage 24...40 V
Discrete Output Current 2 A DC-13
Discrete Output Type open collector logic LO1 end of starting signal
Discrete Output Voltage 24 V (voltage limits: 6...30 V) open collector logic
Icl Starter Rating 6 A
Maximum Switching Current relay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive load
Minimum Switching Current 10 mA at 6 V DC for relay outputs
Motor Power Kw 3 kW, 3 phases at 380...415 V
Motor Starter Type soft starter
Operating Altitude <= 1000 m without derating
Output Voltage <= power supply voltage
Shock Resistance 15 gn for 11 ms conforming to EN/IEC 60068-2-27
Starting Time 1 s / 100
Starting Torque 30...80 % of starting torque of motor connected directly on the line supply
Supply Frequency 50...60 Hz - 5...5 %
Supply Voltage Limits 342-456 V
Type of Start start with voltage ramp
Vibration Resistance 1 gn (f= 13-150 Hz) conforming to EN/IEC 60068-2-6

Seller Information

Documents

Reviews

Write Your Own Review
You're reviewing: soft starter for asynchronous motor - ATS01 - 6 A - 380..415V - 1.5..3 KW
* Required Field
loader
Loading...

check-circle You submitted your review for moderation.