soft starter-ATS22-control 220V-power 230V(7.5kW)/400...440V(15kW)
soft starter-ATS22-control 220V-power 230V(7.5kW)/400...440V(15kW)
soft starter-ATS22-control 220V-power 230V(7.5kW)/400...440V(15kW)
Description
This soft starter can feed 3-phase asynchronous motors in supply line or delta connection. It has a rating of 32A and 230V to 440V, a rated power up to 15kW (400V to 440V in supply line) and up to 22kW (400V to 440V in motor delta connection). It is designed for simple and complex machines such as centrifugal and piston pumps, fans, screw compressors and material handling equipment. Slim form factor improves versatility; allows mounting in frames of any kind of machines. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Compatibility with SoMove software allows configurations and settings to be easily transferred, meaning spares can be quickly installed. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.
Product details
-
[uc] Control Circuit Voltage230 V - 15...10 % 50/60 Hz
-
[us] Rated Supply Voltage230...440 V - 15...10 %
-
Ambient Air Temperature for Operation-10-40 °C (without derating)
-
Ambient Air Temperature for Storage-25-70 °C
-
Depth169 mm
-
Electromagnetic Compatibilityconducted and radiated emissions level A conforming to IEC 60947-4-2
-
Function Availableinternal bypass
-
Height265 mm
-
Ip Degree of ProtectionIP20
-
MarkingCE
-
Net Weight7 kg
-
Network Frequency45...66 Hz
-
Network Number of Phases3 phases
-
Noise Level45 dB
-
Operating Positionvertical +/- 10 degree
-
Pollution Degreelevel 2 conforming to IEC 60664-1
-
Power Dissipation In W44 W for standard applications
-
Power Range7-11 kW at 200-240 V 3 phases
-
Product CertificationsGOST
-
Product Destinationasynchronous motors
-
Product or Component Typesoft starter
-
Product Specific Applicationpumps and fans
-
Protection Typephase failure: line
-
Range of ProductAltistart 22
-
Relative Humidity0-95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
-
StandardsEN/IEC 60947-4-2
-
Utilisation CategoryAC-53A
-
Width130 mm
-
Assembly Stylewith heat sink
-
Communication Data Linkserial
-
Communication Port ProtocolModbus
-
Component NameATS22
-
Connector Type1 RJ45
-
Control Circuit Consumption20 W
-
Device Connectionin the motor supply line
-
Discrete Input Logicpositive logic LI1, LI2, LI3 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA
-
Discrete Input Number3
-
Discrete Input Type(LI1, LI2, LI3) logic, 5 mA 4.3 kOhm
-
Discrete Input Voltage24 V <= 30 V
-
Discrete Output Number2
-
Discrete Output Typerelay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
-
Factory Setting Current28.5 A
-
Icl Starter Rating32 A for connection in the motor supply line for standard applications
-
Installed Device31
-
Maximum Switching Current5 A 250 V AC resistive 1 relay outputs
-
Minimum Switching Current100 mA at 12 V DC (relay outputs)
-
Motor Power Kw15 kW 400 V
-
Motor Starter Typesoft starter
-
Operating Altitude<= 1000 m without derating
-
Output Current0.4...1 Icl adjustable
-
Physical InterfaceRS485 multidrop
-
Ptc Probe Input750 Ohm
-
Shock Resistance15 gn for 11 ms conforming to EN/IEC 60068-2-27
-
Supply Frequency50...60 Hz - 10...10 %
-
Supply Voltage Limits195-484 V
-
Transmission Rate4800, 9600 or 19200 bps
-
Type of Coolingforced convection
-
Type of Startstart with torque control (current limited to 3.5 In)
-
Vibration Resistance1 gn (f= 13-200 Hz) conforming to EN/IEC 60068-2-6