Single contact block for head Ø22, 1 NO
Single contact block for head Ø22, 1 NO
Single contact block for head Ø22, 1 NO
Description
This product is part of the Easy Harmony XA2 range, an offer of Ø 22mm plastic pushbuttons, switches and pilot lights. This contact block allows fast and easy replacement and configuration of your push buttons and selector switches. It is easily installed and replaced on XA2 complete push-button units and selector switches and connects to control circuits with simple screw-clamp connections. It has 1 NO contact with slow-break operation. It uses silver alloy contact material. It protects operators from unexpected contact with live circuits due to its IP20 protection index. It is designed for 1.5 million cycle operation. It is an IP20 rated product and comes with CE, CCC and EAC certification conforming to GB 14048.1, IEC 60947-1, GB 14048.5 and IEC 60947-5-1 standards . It is easily installed and replaced with simple screw-clamp connections.
Product details
-
[ie] Rated Operational Current2 A at 230 V, AC-15, A600 conforming to IEC 60947-5-1
-
[ui] Rated Insulation Voltage600 V (pollution degree 3) conforming to EN 60947-1
-
[uimp] Rated Impulse Withstand Voltage6 kV conforming to EN 60947-1
-
Ambient Air Temperature for Operation-25-55 °C
-
Ambient Air Temperature for Storage-40-70 °C
-
Compatibility CodeZA2E
-
Contacts Type and Composition1 NO
-
Device Short NameZA2E
-
Electrical Durability500000 cycles, AC-15, 2 A at 230 V, operating rate <60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1
-
Ip Degree of ProtectionIP20 conforming to IEC 60529
-
Mechanical Durability1500000 cycles
-
Product CertificationsCE
-
Product or Component Typecontact block
-
Range of ProductEasy Harmony XA2
-
StandardsEN/IEC 60947-1
-
Tightening Torque0.8-0.8 N.m
-
Connections - Terminals, <= 2 x 1.5 mm² conforming to EN 60947-1
-
[ith] Conventional Free Air Thermal Current10 A conforming to EN/IEC 60947-5-1
-
Contact Block Typesingle
-
Contact Operationslow-break
-
Contacts Materialsilver alloy (Ag/Ni)
-
Contacts Usagestandard contacts
-
Positive Openingwithout
-
Protective TreatmentTC
-
Short-circuit Protection10 A fuse type gL conforming to IEC 60269-1