56163

residual current protection relay, Vigirex RH21M, 30 mA or 300 mA, 220/240 VAC 50/60 Hz, DIN rail mounting

1/1
56163

residual current protection relay, Vigirex RH21M, 30 mA or 300 mA, 220/240 VAC 50/60 Hz, DIN rail mounting

SKU
56163
CHECK DELIVERY TIME & COD AVAILABILITY

Add to compare

No sellers found for this product.

residual current protection relay, Vigirex RH21M, 30 mA or 300 mA, 220/240 VAC 50/60 Hz, DIN rail mounting

Description

VigiPacT RH21M is a DIN rail mounting residual current protection relay. It protects against people direct or indirect contact, property fire hazards and motors. It measures the earth leakage current in an electrical installation via its associated toroid. It trips the associated circuit breaker when the set residual operation current is overrun. The operational supply voltage is 220/240VAC 50/60Hz. The current sensitivity is selectable with 2 thresholds 30 mA and 300 mA. The time delay is instantaneous 0.06s. It requires a local manual reset after a fault clearance. The monitored distribution system voltage is up to 1000 VAC 50/60/400 Hz. It is installed on a DIN-rail inside a switchboard and the protection degree is IP40. It must be associated with a compatible Schneider Electric type A toroid or rectangular sensor.

Product details

  • Activity
    PPCCB
  • [uimp] Rated Impulse Withstand Voltage
    8 kV
  • [us] Rated Supply Voltage
    220...240 V AC 50/60 Hz 55...110 %
  • Ambient Air Temperature for Operation
    -35-70 °C
  • Ambient Air Temperature for Storage
    -55-85 °C
  • Compatibility Code
    RH21M
  • Depth
    74 mm
  • Device Short Name
    RH21M
  • Electromagnetic Compatibility
    conducted and radiated emissions: , B, conforming to CISPR 11
  • Height
    81 mm
  • Ik Degree of Protection
    IK07 conforming to EN 50102
  • Ip Degree of Protection
    IP40 on front face: conforming to EN/IEC 60529
  • Mechanical Robustness
    fire resistance conforming to IEC 60695-2-1
  • Minimum Load
    10 mA at 12 V
  • Mounting Support
    DIN rail
  • Net Weight
    0.3 kg
  • Overvoltage Category
    IV
  • Product or Component Type
    residual current protection relay
  • Range
    VigiPacT
  • Range Compatibility
    TOA earth leakage current sensor
  • Tightening Torque
    auxiliary power supply: 0.6-0.6 N.m top
  • Width
    54 mm
  • Wire Stripping Length
    auxiliary power supply: 7 mm for top connection
  • 9 Mm Pitches
    6
  • Connections - Terminals
    auxiliary power supply: terminal block cable(s) 0.2-2.5 mm² flexible AWG 24...AWG 12
  • [ithe] Conventional Enclosed Thermal Current
    8:00 AM
  • Earth Leakage Current
    0.03-0.03 A
  • Earthing System
    IT
  • Electrical Shock Protection Class
    class II
  • Monitoring
    electronics (continuous)
  • Network Rated Voltage
    1000-1000 V - AC at 50/60 Hz (maximum)
  • Power Consumption in Va
    4 VA
  • Relay Application
    protection relay
  • Reset
    manual reset
  • Residual Earth-leakage Sensitity Adjustment Type
    adjustable 2 settings
  • Residual Earth-leakage Time Delay Adjustment Type
    instantaneous for 0.03-0.03 A
  • Tamperproof of Settings
    protected by sealable cover
  • Test Function
    local
  • Type of Measurement
    earth fault current internal measurement, range: 80...100 %
  • Type of Setting
    selector
  • Earth-leakage Protection Class
    type A
  • Pollution Degree
    3 conforming to IEC 60664-1
  • Relative Humidity
    95-95 % at 55-55 °C
more specification
less specification

Reviews

Write Your Own Review
You're reviewing:residual current protection relay, Vigirex RH21M, 30 mA or 300 mA, 220/240 VAC 50/60 Hz, DIN rail mounting
Your Rating

* Required Field