rectangular sensor L2 type, Vigirex, 470 mm X 160 mm, 1600 A
56054
Description
This toroid is dedicated to VigiPacT type A residual current protection and monitoring relays. It allows the measurement of a current rating up to 3200A for VigiPacT monitoring and protection relays. The transformer ratio is 1/1000. The inner dimensions of the toroid are 470mm X 160mm and the weight is 20kg. The wiring size must be from 0.5 to 2.5 mm². The wiring length should not exceed 10m.
Product Details
| Activity | PPCCB |
|---|---|
| [ie] Rated Operational Current | 3200 A |
| [uimp] Rated Impulse Withstand Voltage | 12 kV |
| Ambient Air Temperature for Operation | -35-80 °C |
| Ambient Air Temperature for Storage | -55-100 °C |
| Depth | outside: 72 mm |
| Device Application | equipment monitoring and control |
| Device Short Name | L |
| Environmental Characteristic | exposure to damp heat not in service (25...55 °C, RH 95 %) : 28 cycles conforming to IEC 60068-2-30 |
| Height | 281 mm |
| Ip Degree of Protection | connectors: IP20 |
| Mounting Mode | fixed (cables) |
| Net Weight | 21.16 kg |
| Overvoltage Category | IV |
| Product Certifications | CE |
| Product or Component Type | earth leakage current sensor |
| Range | VigiPacT |
| Range Compatibility | RH10M residual current protection relay |
| Standards | IEC 60947-2 |
| Width | outside: 572 mm |
| [icw] Rated Short-time Withstand Current | 100 kA for 0.5 s |
| Connections - Terminals | screw connection 0.2-2.5 mm² |
| Current Transformer Type | rectangular sensor |
| Residual Short-circuit Withstand Current | 85 kA / 0.5 s |
| Transformer Ratio | 1/1000 |
Seller Information
Documents
Reviews
Write Your Own Review