Programmable receiver - 2 relays - 24..240 V AC/DC - 2 pusbuttons - 6 LEDs
ZBRRA
Description
This programmable receiver is part of the range Harmony XB5R plastic and XB4R metal wireless and batteryless pushbuttons. It features a configurable receiver equipped with 2 buttons (teach and parameter setting), 6 indicating LEDs (power ON, function modes, output status, signal strength). It is supplied set to monostable output function and can be configured to bistable and stop/start functions. It features 2 relay outputs type RT 3A. Its supply voltage is 24V to 240V AC/DC. It weighs 130g.
Product Details
| [ui] Rated Insulation Voltage | 250 V conforming to IEC 60664-1 |
|---|---|
| [uimp] Rated Impulse Withstand Voltage | 4 kV |
| [us] Rated Supply Voltage | 24...240 V |
| Ambient Air Temperature for Storage | -40-70 °C |
| Breaking Capacity | 15 W |
| Depth | 75 mm |
| Device Short Name | ZBRRA |
| Electrical Connection | 1 conductor cable 0.14-2.5 mm² - AWG 26...AWG 14 - solid - without cable end conforming to IEC 60947-1 |
| Electrical Durability | 100000 cycles |
| Electromagnetic Compatibility | immunity for industrial environments conforming to EN/IEC 61000-6-2 |
| Height | 4.6 cm |
| Ip Degree of Protection | IP20 (casing) conforming to IEC 60529 |
| Marking | CE |
| Mechanical Durability | 1000000 cycles |
| Mounting Support | 35 mm symmetrical DIN rail conforming to EN/IEC 60715 |
| Net Weight | 0.13 kg |
| Operating Position | any position without derating |
| Overvoltage Category | II conforming to IEC 60664-1 |
| Pollution Degree | 2 conforming to IEC 60664-1 |
| Product Certifications | C-Tick |
| Product or Component Type | programmable receiver |
| Product Specific Application | interface to actuators |
| Range of Product | Harmony |
| Relative Humidity | 90-90 % at -20-55 °C, without condensation conforming to ETSI EN 300 440-1 |
| Response Time | < 30 ms after transmitter clicks |
| Standards | CSA C22.2 No 14 |
| Tightening Torque | 0.5-1 N.m conforming to EN/IEC 60947-1 |
| Time Delay Range | 0.5 s (tolerance: - 15...15 %) |
| Utilisation Category | AC-15 : B300 conforming to EN/IEC 60947-5-1 |
| Width | 8 cm |
| Antenna Gain | 0 dBi |
| Antenna Type | omnidirectional |
| Bandwidth | 5-5 MHz |
| Communication Port Protocol | Zigbee green power at 2.4 GHz conforming to IEEE 802.15.4 |
| Control Circuit Frequency | 50...60 Hz +/- 10 % |
| Function of Module | bi-stable|monostable|stop/start |
| Housing Material | self-extinguishing plastic |
| Input Output Isolation | galvanic isolation |
| Insulation Resistance | > 500 MOhm at 500 V DC conforming to NF C 20-030 |
| Level or Class | 5M00G7W |
| Max Power Consumption in w | 1 mW |
| Maximum Power Consumption in w | 4 W AC/DC |
| Maximum Sensing Distance | 100 m in free field |
| Maximum Switching Current | 5 mA AC/DC |
| Maximum Switching Voltage | 250 V AC/DC |
| Modulation Technique | O-QPSK |
| Nominal Output Current | 0.3 A at 48 V DC conforming to EN/IEC 60947-5-1 |
| Number of Channels | 1 |
| Output Contacts | 2 C/O |
| Output Type | 2 relays |
| Radio Agreement | RSS |
| Rated Short-duration Power Frequency Withstand Voltage | 1.5 kV 50 Hz conforming to EN/IEC 60947-5-1 |
| Reset Time | 2 ms time delay , 2 ms time delay |
| Shock Resistance | 10 gn (duration = 16 ms) for 6000 shocks conforming to IEC 60068-2-27 |
| Short-circuit Protection | 0.4 A fuse type fast blow |
| Status Led | 1 LED green for power ON |
| Surge Withstand | 1 kV differential mode conforming to IEC 61000-4-5 |
| Switching Capacity in Va | 1250 VA |
| Transmission Frequency | 2405 MHz |
| Vibration Resistance | +/- 7.5 mm (f= 5-14 Hz) conforming to IEC 60068-2-6 |
| Product specific application | interface to actuators |
| Range of Product | Harmony |
| Length | 9.6 cm |
| Activity code | IDSIG |
Seller Information
Documents
Extended Warranty
Reviews
Write Your Own Review