Double-headed push button, metal, Ø22, 1 green flush marked I + 1 red projecting marked O, 1 NO + 1 NC
Double-headed push button, metal, Ø22, 1 green flush marked I + 1 red projecting marked O, 1 NO + 1 NC
Double-headed push button, metal, Ø22, 1 green flush marked I + 1 red projecting marked O, 1 NO + 1 NC
Description
This Harmony XB4 double-headed modular push button has 1 red and 1 green button, operates with a spring return mechanism. It has a metal bezel. It is marked with "I" and "O" symbols. This double-headed push button provides a complete 2 button interface to your machines with a single panel cut-out. It is easily installed into standard 22mm diameter cut-outs and connected with simple screw-clamp connections. Its schematic is clearly distinguishable thanks to clear colors and markings, minimizing errors during initial wiring and later maintenance operations. It is impact resistant, dust resistant, water resistant and vibration resistant thanks to its IP66 / IP67 / IP69 / IP69K, making it ideal for operation in harsh environments.
Product details
-
[ie] Rated Operational Current3 A at 240 V, AC-15, A600 conforming to EN/IEC 60947-5-1
-
[ui] Rated Insulation Voltage600 V (pollution degree 3) conforming to EN 60947-1
-
[uimp] Rated Impulse Withstand Voltage6 kV conforming to EN 60947-1
-
[us] Rated Supply Voltage24 V
-
Ambient Air Temperature for Operation-40-70 °C
-
Ambient Air Temperature for Storage-40-70 °C
-
Compatibility CodeXB4
-
Contacts Type and Composition1 NO + 1 NC
-
Device Short NameXB4
-
Electrical Durability1000000 cycles AC-15, 2 A at 230 V, operating rate <3600 cyc/mn, load factor: 0.5 conforming to EN/IEC 60947-5-1: appendix C
-
Ik Degree of ProtectionIK06 conforming to IEC 50102
-
Ip Degree of ProtectionIP67 conforming to IEC 60529
-
Mechanical Durability1000000 cycles
-
Mounting Diameter22 mm
-
Nema Degree of ProtectionNEMA 13
-
Net Weight0.116 kg
-
Product CertificationsBV
-
Product or Component Typedouble-headed push-button
-
Range of ProductHarmony XB4
-
StandardsUL 508
-
Tightening Torque0.8-1.2 N.m conforming to EN 60947-1
-
Connections - Terminalsscrew clamp terminals, <= 2 x 1.5 mm² with cable end conforming to EN/IEC 60947-1
-
[ith] Conventional Free Air Thermal Current10 A conforming to EN/IEC 60947-5-1
-
Bezel Materialchromium plated metal
-
Colour of Markingblack marking when white caps
-
Contact Operationslow-break
-
Contacts Materialsilver alloy (Ag/Ni)
-
Contacts Usagestandard contacts
-
Customizable0
-
Device Presentationcomplete product
-
Electrical Reliabilityλ < 10exp(-6) at 5 V and 1 mA in clean environment conforming to EN/IEC 60947-5-4
-
Electrical Shock Protection Classclass I conforming to IEC 60536
-
Fixing Collar Materialzamak
-
Head Typestandard
-
Operating Force3.5 N NC changing electrical state
-
Operating Travel1.5 mm (NC changing electrical state)
-
Operator Profile1 flush - 1 projecting push-buttons
-
Operators Descriptiongreen ''I'' - red ''O''
-
Positive Openingwith conforming to EN/IEC 60947-5-1 appendix K
-
Protective TreatmentTH
-
Resistance to High Pressure Washer7000000 Pa at 55 °C, distance : 0.1 m
-
Shape of Screw Headcross compatible with JIS No 1 screwdriver
-
Shape of Signaling Unit Headrectangular
-
Shock Resistance30 gn (duration = 18 ms) for half sine wave acceleration conforming to IEC 60068-2-27
-
Short-circuit Protection10 A cartridge fuse type gG conforming to EN/IEC 60947-5-1
-
Vibration Resistance5 gn (f= 2-500 Hz) conforming to IEC 60068-2-6
-
Type of Operatorspring return
-
Cap/operator or Lens Colourgreen