controller M221 16 IO relay Ethernet
controller M221 16 IO relay Ethernet
controller M221 16 IO relay Ethernet
Description
This product is part of the Modicon M221 range, an offer of programmable logic controllers for hardwired architectures. This logic controller provides 9 discrete inputs and 7 relay ethernet outputs with 10bit input resolution, normally opened relay output. It is a Modicon logic controller with a rated supply voltage of 100V to 240V AC, an output voltage of 5V to 125V DC, 5V to 250V AC and an output current of 2A with sink or source input logic. This product requires minimal installation and offers tremendous versatility. Integrated connections are USB port with mini B USB 2.0 connector, non isolated serial link serial 1 with RJ45 connector and RS232/RS485 interface and ethernet with RJ45 connector. It is a Modicon M221 controller with a network frequency of 50/60Hz, 256KB for internal variables RAM, user application and data RAM, a built-in flash memory of 256KB and a SD card memory capacity of 2GB. It is an IP20 rated product. Its dimensions are 95mm (Width) x 70mm (Depth) x 90mm (Height). It weighs 0.346kg. This product is certified by CE, IACS E10, RCM, ABS, LR, DNV-GL, CSA, EAC and CULus. It meets EN/IEC 60664-1, EN/IEC 61131-2 and EN/IEC 61010-2-201 standards. It supports DIN rail mount. Achieve benchmark performance while increasing profitability with the Modicon M221 through intuitive machine programming with SoMachine Basic, ready-to-use applications and function blocks
Product details
-
[us] Rated Supply Voltage100...240 V AC
-
Ambient Air Temperature for Operation-10-55 °C (horizontal installation)
-
Ambient Air Temperature for Storage-25-70 °C
-
Depth70 mm
-
Electrical Connectionremovable screw terminal block for inputs
-
Electrical Durability100000 cycles AC-12, 120 V, 240 VA, resistive
-
Environmental Characteristicordinary and hazardous location
-
Height90 mm
-
Inrush Current40 A
-
Ip Degree of ProtectionIP20 with protective cover in place
-
MarkingCE
-
Maximum Power Consumption in Va49 VA at 100...240 V with max number of I/O expansion module
-
Mechanical Durability20000000 cycles for relay output
-
Minimum Load1 mA at 5 V DC for relay output
-
Mounting Supporttop hat type TH35-15 rail conforming to IEC 60715
-
Net Weight0.346 kg
-
Network Frequency50/60 Hz
-
Pollution Degree<= 2
-
Product CertificationsCSA
-
Product or Component Typelogic controller
-
Protection Typewithout protection at 5 A
-
Range of ProductModicon M221
-
Relative Humidity10-95 %, without condensation (in operation)
-
Response Time35 µs turn-off, I2...I5 terminal(s) for input
-
StandardsEN/IEC 61010-2-201
-
Width95 mm
-
Absolute Accuracy Error+/- 1 % of full scale for analog input
-
Analogue Input Number2 at 0...10 V
-
Analogue Input Resolution10 bits
-
Backup Time1 year at 25 °C (by interruption of power supply)
-
Battery TypeBR2032 lithium non-rechargeable, battery life: 4 year(s)
-
Clock Drift<= 30 s/month at 25-25 °C
-
Communication Port ProtocolUSB port: USB - SoMachine-Network
-
Communication ServiceDHCP client
-
Configurable Filtering Time0 ms for input
-
Control Signal Typepulse/direction
-
Conversion Time1 ms per channel + 1 controller cycle time for analogue input analog input
-
Counting Input Number4 fast input (HSC mode) at 100 kHz 32 bits
-
Data Backed Up256 kB built-in flash memory for backup of application and data
-
Data Storage Equipment2 GB SD card (optional)
-
Discrete I/o Number16
-
Discrete Input Current7 mA for discrete input
-
Discrete Input Logicsink or source (positive/negative)
-
Discrete Input Number9 , discrete input conforming to IEC 61131-2 Type 1
-
Discrete Input Voltage24 V
-
Discrete Input Voltage TypeDC
-
Discrete Output Current2 A
-
Discrete Output Number7 relay
-
Discrete Output Typerelay normally open
-
Discrete Output Voltage5...125 V DC
-
Electromagnetic Emissionconducted emissions - test level: 79 dBμV/m QP/66 dBμV/m AV ( power lines (AC)) at 0.15-0.5 MHz conforming to EN/IEC 55011
-
Exct Time for Event Task60 µs response time
-
Execution Time for 1 Kinstruction0.3 ms for event and periodic task
-
Execution Time Per Instruction0.2 µs Boolean
-
Immunity to Microbreaks10 ms
-
Input Impedance3.4 kOhm for discrete input
-
Insulationbetween input and internal logic at 500 V AC
-
Integrated Connection TypeUSB port with mini B USB 2.0 connector
-
Local Signalling1 LED (green) for PWR
-
Lsb Value10 mV
-
Maximum Cable Distance Between Devicesshielded cable: <10 m for fast input
-
Maximum Current Per Output Common6 A at COM 1
-
Maximum Number of I/o Expansion Module4 for transistor output
-
Maximum Size of Object Areas255 %C counters
-
Memory Capacity256 kB for user application and data RAM with 10000 instructions
-
Operating Altitude0...2000 m
-
Output Voltage Limits125 V DC
-
Permitted Overload on Inputs+/- 30 V DC for 5 min (maximum) for analog input
-
Port Ethernet10BASE-T/100BASE-TX 1 port with 100 m copper cable
-
Power Supply Output Current0.325-0.325 A 5 V for expansion bus
-
Realtime Clockwith
-
Regulation Loopadjustable PID regulator up to 14 simultaneous loops
-
Reset Time1 s
-
Resistance to Conducted Disturbances10 V 0.15...80 MHz conforming to EN/IEC 61000-4-6
-
Resistance to Electromagnetic Fields10 V/m 80 MHz...1 GHz conforming to EN/IEC 61000-4-3
-
Resistance to Electrostatic Discharge8 kV in air conforming to EN/IEC 61000-4-2
-
Resistance to Fast Transients2 kV (power lines) conforming to EN/IEC 61000-4-4
-
Resistance to Magnetic Fields30 A/m 50/60 Hz conforming to EN/IEC 61000-4-8
-
Sensor Power Supply24-24 V DC at 250 mA supplied by the controller
-
Shock Resistance98 m/s² for 11 ms
-
Storage Altitude0-3000 m
-
Supply(serial)serial link supply: 5 V, <200 mA
-
Supply Voltage Limits85-264 V
-
Surge Withstand2 kV power lines (AC) common mode conforming to EN/IEC 61000-4-5
-
Switching Frequency20 switching operations/minute with maximum load
-
Transmission Rate1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 15-15 m for RS485
-
Vibration Resistance3.5 mm at 5-8.4 Hz on symmetrical rail
-
Voltage State 0 Guaranteed<= 5 V for input
-
Voltage State 1 Guaranteed>= 15 V for input