Closed toroid for residual current protection GA - Ø 300 mm

Be the first one to review this.
login_green To View the best prices please Sign in / Register.
Out of stock


This toroid is dedicated to Vigilohm Insulation Fault locators, and to VigiPacT type A residual current protection and monitoring relays. It allows the monitoring of the injected component from Vigilohm Insulation Monitor, and the measurement of a current rating up to 630A for VigiPacT monitoring and protection relays. The transformer ratio is 1/1000. The inner diameter of the toroid is 300 millimeters and the weight is 2.280kg. The cables must be centered within the toroid and the diameter represented by all these cables should not exceed 150 millimeters. The maximum cross section per phase (R, S, T, N) is 2 cables of 240mm² for a copper conductor.

Product Details

Activity PPCCB
[ie] Rated Operational Current 630 A
[ui] Rated Insulation Voltage 1000 V
[uimp] Rated Impulse Withstand Voltage 12 kV
Ambient Air Temperature for Operation -35-70 °C
Ambient Air Temperature for Storage -55-85 °C
Cable Outer Diameter 150-150 mm for 2 cables : 240-240 mm² (maximum)
Compatibility Code GA300
Depth outside: 46 mm
Device Application equipment monitoring and control
Device Short Name GA300
Diameter 291 mm inner:
Environmental Characteristic exposure to damp heat not in service (25...55 °C, RH 95 %) : 28 cycles conforming to IEC 60068-2-30
Height 360 mm
Ip Degree of Protection connectors: IP20
Market Segment small commercial
Mounting Mode fixed (cables)
Net Weight 2.23 kg
Network Frequency 45...440 Hz
Network Type AC/DC
Overvoltage Category IV
Product Certifications CE
Product or Component Type earth leakage current sensor
Range VigiPacT
Range Compatibility RH10M residual current protection relay
Standards IEC 60947-2
Width outside: 390 mm
[icw] Rated Short-time Withstand Current 85 kA for 0.5 s
Connections - Terminals connection by clip 6.35-6.35 mm²
Current Transformer Type A type closed toroid
Residual Short-circuit Withstand Current 85 kA / 0.5 s conforming to IEC 60947-2
Transformer Ratio 1/1000
Pollution Degree level 3 conforming to IEC 60664-1

Seller Information



Write Your Own Review
You're reviewing: Closed toroid for residual current protection GA - Ø 300 mm
* Required Field

check-circle You submitted your review for moderation.