closed toroid A type, for Vigirex and Vigilhom, TA30, inner diameter 30 mm, rated current 65 A
Excl. Tax
Excl. Tax
All Sellers
Seller | Price | Delivery | Shipping Cost | ||
---|---|---|---|---|---|
View Seller Profile
B2B Network
|
|
Shipping Cost
|
No sellers found for this product.
closed toroid A type, for Vigirex and Vigilhom, TA30, inner diameter 30 mm, rated current 65 A
Excl. Tax
Excl. Tax
Description
This toroid is dedicated to Vigilohm Insulation Fault locators, and to VigiPacT type A residual current protection and monitoring relays. It allows the monitoring of the injected component from Vigilohm Insulation Monitor, and the measurement of a current rating up to 65A for VigiPacT monitoring and protection relays. The transformer ratio is 1/1000. The inner diameter of the toroid is 30 millimeters and the weight is 0.120kg. The cables must be centered within the toroid and the diameter represented by all these cables should not exceed 15 millimeters. The maximum cross section per phase (R, S, T, N) is 25mm² for a copper conductor.
Product Details
Activity | PPCCB |
---|---|
[ie] Rated Operational Current | 65 A |
[ui] Rated Insulation Voltage | 1000 V |
[uimp] Rated Impulse Withstand Voltage | 12 kV |
Ambient Air Temperature for Operation | -35-70 °C |
Ambient Air Temperature for Storage | -55-85 °C |
Cable Outer Diameter | 15-15 mm: 25-25 mm² (maximum) |
Compatibility Code | TA30 |
Depth | 29 mm |
Device Application | equipment monitoring and control |
Device Short Name | TA30 |
Diameter | 30 mm inner: |
Environmental Characteristic | exposure to damp heat not in service (25...55 °C, RH 95 %) : 28 cycles conforming to IEC 60068-2-30 |
Height | 82 mm |
Ip Degree of Protection | connectors: IP20 |
Market Segment | residential |
Mounting Mode | fixed (plain backplate) |
Net Weight | 0.12 kg |
Network Frequency | 45...440 Hz |
Network Type | AC/DC |
Overvoltage Category | IV |
Product Certifications | CE |
Product or Component Type | earth leakage current sensor |
Range | VigiPacT |
Range Compatibility | RH10M residual current protection relay |
Standards | IEC 60947-2 |
Width | 60 mm |
[icw] Rated Short-time Withstand Current | 85 kA for 0.5 s |
Connections - Terminals | screw connection 0.22-0.22 mm² |
Calorific Value | 0.98 MJ |
Current Transformer Type | A type closed toroid |
Residual Short-circuit Withstand Current | 85 kA / 0.5 s conforming to IEC 60947-2 |
Transformer Ratio | 1/1000 |
Pollution Degree | level 3 conforming to IEC 60664-1 |