variable speed drive ATV310, 22 kW, 30 hp, 380...460 V, 3 phase, without filter

Name: variable speed drive ATV310, 22 kW, 30 hp, 380...460 V, 3 phase, without filter
Brand: Schneider Electric
SKU: ATV310HD22N4E
Price: 4278 AED
Availability: InStock

ATV310HD22N4E

Be the first one to review this.

To View the best prices please Sign in / Register.

Only 0 left in stock.

variable speed drive ATV310, 22 kW, 30 hp, 380...460 V, 3 phase, without filter

Product Details

Activity	IDVSD
Pincode Group	default
Part Number	ATV310HD22N4E
ambient air temperature for storage	-25-70 °C
depth	212 mm
device short name	ATV310
height	390 mm
IP degree of protection	IP20 without blanking plate on upper part, IP40 top
minimum switching current	5 mA at 24 V DC for logic relay
motor power hp	30 hp
motor power kW	22 kW
net weight	8.5 kg
tightening torque	2.2-2.4 N.m
width	180 mm
Assembly style	with heat sink
Supply frequency	50/60 Hz +/- 5 %
Supply	internal supply for reference potentiometer: 5 V (4.75-5.25 V)DC, <10 mA with overload and short-circuit protection, internal supply for logic inputs: 24 V (20.4-28.8 V)DC, <100 mA with overload and short-circuit protection
Type of cooling	integrated fan
Continuous output current	46 A at 4 kHz, 60 A at 4 kHz
Discrete input number	4
Discrete input type	programmable LI1...LI4 24 V 18...30 V
Analogue input number	1
Analogue input type	configurable current AI1 0...20 mA 250 Ohm, configurable voltage AI1 0...10 V 30 kOhm, configurable voltage AI1 0...5 V 30 kOhm
Discrete output type	logic output LO+, LO-, protected relay output R1A, R1B, R1C 1 C/O
Maximum switching current	2 A at 250 V AC on inductive load cos phi = 0.4 L/R = 7 ms for logic relay, 2 A at 30 V DC on inductive load cos phi = 0.4 L/R = 7 ms for logic relay, 3 A at 250 V AC on resistive load cos phi = 1 L/R = 0 ms for logic relay, 4 A at 30 V DC on resistive load cos phi = 1 L/R = 0 ms for logic relay
Analogue output number	1
Discrete output number	2
Discrete input logic	negative logic (sink), > 16 V (state 0), < 10 V (state 1), input impedance 3.5 kOhm, positive logic (source), 0...< 5 V (state 0), > 11 V (state 1)
Transmission rate	4800 bit/s, 9600 bit/s, 19200 bit/s, 38400 bit/s
Analogue output type	AO1 software-configurable voltage: 0...10 V, impedance: 470 Ohm, resolution 8 bits, AO1 software-configurable current: 0...20 mA, impedance: 800 Ohm, resolution 8 bits
Sampling duration	10 ms for analogue input, 20 ms, tolerance +/- 1 ms for logic input
Prospective line Isc	22 kA, 5 kA
Asynchronous motor control profile	quadratic voltage/frequency ratio, energy saving ratio, sensorless flux vector control
Apparent power	46.2 kVA, 47 kVA
Frequency resolution	analog input: converter A/D, 10 bits, display unit: 0.1 Hz
Motor slip compensation	preset in factory, adjustable
Number of addresses	1-247 for Modbus
Speed range	Jan-20
Linearity error	+/- 0.3 % of maximum value for analogue input
Acceleration and deceleration ramps	U, S, linear from 0...999.9 s
Speed drive output frequency	0.5-400 Hz
Transmission frame	RTU for Modbus
Communication service	read holding registers (03) 29 words, write single register (06) 29 words, write multiple registers (16) 27 words, read/write multiple registers (23) 4/4 words, read device identification (43)
Transient overtorque	170-200 % of nominal motor torque depending on drive rating and type of motor
Maximum transient current	69 A for 60 s, 66 A for 60 s
Line current	64.2 A, 71.2 A
Nominal switching frequency	4 kHz
EMC filter	without EMC filter
Braking to standstill	by DC injection, <30 s
Time constant	20 ms +/- 1 ms for reference change
Braking torque	up to 150 % of nominal motor torque with braking resistor at high inertia, up to 70 % of nominal motor torque without braking resistor
electromagnetic compatibility	electrical fast transient/burst immunity test - test level: level 4 conforming to EN/IEC 61000-4-4, electrostatic discharge immunity test - test level: level 3 conforming to EN/IEC 61000-4-2, immunity to conducted disturbances - test level: level 3 conforming to EN/IEC 61000-4-6, radiated radio-frequency electromagnetic field immunity test - test level: level 3 conforming to EN/IEC 61000-4-3, voltage dips and interruptions immunity test conforming to EN/IEC 61000-4-11, surge immunity test - test level: level 3 conforming to EN/IEC 61000-4-5
ambient air temperature for operation	-10-55 °C without derating, 55-60 °C protective cover from the top of the drive removed with current derating 2.2 % per °C
standards	EN/IEC 61800-5-1, EN/IEC 61800-3
environmental characteristic	dust pollution resistance class 3S2 conforming to EN/IEC 60721-3-3, chemical pollution resistance class 3C3 conforming to EN/IEC 60721-3-3
Electrical Connection	terminal, clamping capacity: 10 mm² (L1, L2, L3, PA/+, PB, U, V, W)
Network Number of Phases	three phase
Communication Port Protocol	Modbus
Insulation	electrical between power and control
Connector Type	RJ45 (on front face) for Modbus
Noise Level	50 dB
Switching Frequency	2...12 kHz adjustable