soft starter-ATS22-control 220V-power 230V(22kW)/400...440V(45kW)

ATS22D88Q
Be the first one to review this.
login_green To View the best prices please Sign in / Register.

Customizable Options:

Only 0 left in stock.
plain-icon

Product Details

Activity IDVSD
Pincode Group default
Part Number ATS22D88Q
[Uc] control circuit voltage 230 V - 15...10 % 50/60 Hz
[Us] rated supply voltage 230...440 V - 15...10 %
ambient air temperature for storage -25-70 °C
depth 207 mm
height 295 mm
IP degree of protection IP20
marking CE
minimum switching current 100 mA at 12 V DC (relay outputs)
motor power kW 22 kW 230 V, 45 kW 400 V, 45 kW 440 V
motor starter type soft starter
net weight 12 kg
network frequency 45...66 Hz
operating altitude <= 1000 m without derating, > 1000...< 2000 m with current derating of 2.2 % per additional 100 m
operating position vertical +/- 10 degree
pollution degree level 2 conforming to IEC 60664-1
power dissipation in W 66 W for standard applications
power range 15-25 kW at 200-240 V 3 phases, 30-50 kW at 380-440 V 3 phases
product certifications CCC, CSA, UL, GOST, C-Tick
product or component type soft starter
range of product Altistart 22
relative humidity 0-95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
shock resistance 15 gn for 11 ms conforming to EN/IEC 60068-2-27
supply voltage limits 195-484 V
utilisation category AC-53A
width 145 mm
IcL starter rating 88 A for connection in the motor supply line for standard applications
Type of start start with torque control (current limited to 3.5 In)
Assembly style with heat sink
Supply frequency 50...60 Hz - 10...10 %
Type of cooling forced convection
Discrete input voltage 24 V <= 30 V
Discrete input number 3
Discrete input type (LI1, LI2, LI3) logic, 5 mA 4.3 kOhm
Discrete output type relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O, relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
Maximum switching current 5 A 250 V AC resistive 1 relay outputs, 5 A 30 V DC resistive 1 relay outputs, 2 A 250 V AC inductive 0.4 20 ms relay outputs, 2 A 30 V DC inductive 7 ms relay outputs
Discrete output number 2
Discrete input logic positive logic LI1, LI2, LI3 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA
Transmission rate 4800, 9600 or 19200 bps
Device connection to the motor delta terminals, in the motor supply line
Component name ATS22
Installed device 31
Communication data link serial
PTC probe input 750 Ohm
Control circuit consumption 20 W
Factory setting current 81 A
vibration resistance 1 gn (f= 13-200 Hz) conforming to EN/IEC 60068-2-6, 1.5 mm (f= 2-13 Hz) conforming to EN/IEC 60068-2-6
electromagnetic compatibility conducted and radiated emissions level A conforming to IEC 60947-4-2, damped oscillating waves level 3 conforming to IEC 61000-4-12, electrostatic discharge level 3 conforming to IEC 61000-4-2, immunity to electrical transients level 4 conforming to IEC 61000-4-4, immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3, voltage/current impulse level 3 conforming to IEC 61000-4-5
ambient air temperature for operation -10-40 °C (without derating), 40-60 °C (with current derating 2.2 % per °C)
standards EN/IEC 60947-4-2
Network Number of Phases 3 phases
Function Available internal bypass
Communication Port Protocol Modbus
Connector Type 1 RJ45
Noise Level 45 dB

Seller Information

Documents

Extended Warranty

Extended Warranty Terms and Conditions

To ensure your product is covered under our extended warranty program, it is the customer's responsibility to register the asset upon receiving the product. Failure to complete the registration will result in the product not being eligible for the extended warranty.

Please follow the steps outlined in the attached PDF document to complete your registration. The registration must be completed to activate your warranty coverage. We appreciate your cooperation in this process.  

 

       pdf-icon Extended Warranty

Reviews

Write Your Own Review
You're reviewing: soft starter-ATS22-control 220V-power 230V(22kW)/400...440V(45kW)
* Required Field
loader
Loading...

check-circle You submitted your review for moderation.

Frequently Bought Together

TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 115 A - 220 V AC 50/60 Hz coil
LC1D115M7

In stock

AED 784.00
AED 1,184.71
TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 115 A - 110 V AC 50/60 Hz coil
LC1D115F7

In stock

AED 636.09
AED 1,184.71
TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 115 A - 48 V AC 50/60 Hz coil
LC1D115E7

In stock

AED 784.00
AED 1,184.71
TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 115 A - 24 V AC 50/60 Hz coil
LC1D115B7

In stock

AED 636.09
AED 1,184.71
remote terminal - ATS22 - for soft starter for asynchronous motor - IP54
VW3G22101

In stock

AED 179.00
AED 284.20