SE Easy UPS, 800VA, Floor/Wall Mount, 230V, 6x IEC C13 outlets, AVR
BVS800I
Product Details
| Activity | SP |
|---|---|
| Pincode Group | default |
| Part Number | BVS800I |
| Battery Life | 5 year(s) |
| Battery Type | lead-acid battery |
| Battery Voltage | 12 V |
| Charging Time | 8 h |
| depth | 305 mm |
| Electrical Connection | input: 1 inlet IEC 320 C14, output: 6 outlet IEC 320 C13 |
| Energy Values | 156 J |
| height | 92.5 mm |
| input voltage | 230 V AC |
| IP degree of protection | IP20 |
| mounting support | wall, floor |
| net weight | 5.3 kg |
| network frequency | 45...65 Hz |
| Number of Batteries | 1 |
| operating altitude | 0...6561 ft |
| output voltage | 230 V AC |
| product certifications | CE |
| product or component type | uninterruptible power supply (UPS) |
| Protection Device Type | surge protection device (SPD), miniature circuit breaker (MCB), fuse |
| Quantity per set | set of 1 |
| range of product | Easy UPS 1Ph BVS Series |
| relative humidity | 0-90 %, non-condensing |
| reset | automatic reset |
| Topology | line interactive |
| Transfer Time | 6 ms typical : 10 ms maximum |
| Type of Installation | indoor |
| Type of Signal | stepped approximation to a sinewave |
| width | 160.5 mm |
| ambient air temperature for operation | 0-40 °C |
| standards | EN/IEC 62040-1:2019/A11:2021, EN/IEC 62040-2:2006/AC:2006, EN/IEC 62040-2:2018 |
| local signalling | alarm, distinctive for low battery, alarm, continuous or intermittent tone for overload, LED for battery status |
| power range | 800 VA, 450 W |
Seller Information
Documents
Extended Warranty
Reviews
Write Your Own Review